| Working Voltage | - AC110V or 220V, 50/60Hz
- Please select the voltage in the options menu
|
| Power | |
Control Panel
| - 4,5" touch screen panel controls all necessary parameters for automatic operation, including:
- Purging pressure and time, as well cycle time ( -90KPa - 100Pa)
- Sealing mode: side / top-sealing without vacuum or Vacuum sealing
- Sealing Temperature: RT - 250ºC Max. ( +/- 2 ºC) adjustable
- Vacuum standing time： 0 - 900 S Adjustable ( Vaccum level 10-2 torr)
- Heated sealing time: 0 - 90 S adjustable （ 3 - 4 second suggested）
Note
- A compressive air pump or inert gas cylinder may be needed. Pls click pic 1 to order
- The vacuum pump is required for vacuum standing and final sealing ( optional, click pic 2 to order)
- For high vacuum, you can choose a turbo pump, which can reach a 10-4 torr vacuum level. Pls, click the pic. 3 to order
 Pic. 1 Pic. 2  Pic. 3
|
Back Panel
| - Inert gas port, compressive gas port, and vacuum ports are installed on the back panel
- You need an air pump to operate ( optional, click Pic. 1 to order)
- You need an inert gas tank to purge the chamber ( not included)
|
Working Area
 
| - Maximum pouch cell size: 340mm (L) x 340mm (W) x 12mm (H)
- Refer to the Standard sealing area pic below to find out the maximum size of the battery pouch that can be placed in the working area.
- The larger size may available upon request and built based on the order
- Multiple pouch cells sealing module
- Multiple pouch cells one-time sealing
- The pouch cell module set could be customized due to request at an extra cost
|
Spring Loaded Pressure Board
| - Equips with a Spring Loaded Pressure Board to push air out of the pouch cell before vacuuming
- Produces a much tighter and neater sealing result
- Max. working pouch cell thickness: 12mm
- For sealing pouch cells that are thicker than 12mm, simply remove the pressure board
|
| Sealing Blade | - Copper made a sealing blade with rubber buffer (soft-sealing)
- 340 mm x 6 mm (The sealing blade depth and width could be customized at an extra cost)
- Parallelism tolerance: 0.03 mm
|
| Sealing Pressure | |
| Heating Time | - 0 - 99 seconds Adjustable
|
| Sealing Temperature | - 50 - 250°C adjustable with control accuracy of +/-2°C
|
Glove Box Compatibility
 | - A KF40 Feedthrough for Glovebox is included in the package.
- Please use high-purity inert gasses (Ar or N2), when operating in the glove box. Using Air Compressor driven when operating outside the glove box.
- DO NOT set the pressure gauge above 90 psi (0.6 Mpa)!
|
| Product Dimensions | - 530 mm L x 490 mm W x 600 H
|
| Product Weight | |
| Shipping Dimensions | |
| Shipping Weight | |
| Compliance | - CE Certified
- NRTL or CSA certification is available upon request at the extra cost
- The patent 201220296252. X for the Pouch Cell Sealing Machine MSK-115A-L since January 2013.
|
| Warranty | - One-year limited warranty with lifetime support
- Rusting and damage due to improper storage conditions or maintenance are not covered by the warranty.
|
| Operation Video |  |
| Application Notes | |
