Furnace Structure | - Double-layer structure with a cooling fan to keep furnace exteriors safe to touch
- Heavy-duty heating corundum chamber where the heating coil is inserted inside
- One venting port is built on top of the furnace
- Can processing corrosive material
|
Heating Chamber
| - Material: sintered corundum
- Dimensions: 12" D x 8" W x 5" H
- Heating element: FeCrAl coil inserted inside the chamber
- Three sides heating: left, right & bottom.
- K type thermal couple with alumina protection sleeve
- Venting port of alumina on the top of the chamber
|
Power
| - 4 kW
- AC 208V-240V single phase, 50/60 Hz
- Note: Power cable is included without a plug. Please install a plug by yourself or click the link below the picture to choose a plug according to your country or your lab requirement
|
Working Temperature | - Max. 1050°C ≤ 2 hours
- 1000°C continuously
- Temperature Accuracy: +/- 1° C
- Heating Rate: ≤ 10°C / min
|
Temperature Controller
| - FA-YD518P-AG temperature controller is included
- Proportional–integral–derivative control (PID control) and auto-tune function
- 30 segments programmed with ramping, cooling, and dwelling steps
- Built-in over-temperature alarm and thermocouple failure alarm
- +/- 1 ºC temperature control accuracy
- Default RS485 PC communication port
- Thermocouple: K Type
|
Laptop & software (Optional)
| - Brand new laptop with Microsoft Windows 10 and Microsoft Office 2013 (30 days free trial) .
- Labview-Based Temperature Control System (EQ-MTS01) enables the user to edit temperature profiles, manage heat-treatment recipes, and record and plot data for MTI furnaces.
- Note: The software is only compatible with MTI’s Temperature Controller
|
Overall Dimensions
| 750 x 550 x 720mm (L x W x H) Click Pic to order a heavy-duty mobile cart to carry the furnace |
Shipping Weight & Dimensions | |
Warranty
| - One-year limited warranty with lifetime support. (Consumable parts such as sample plates and heating elements are not covered by the warranty, please order the replacement at related products below.)
- ATTENTION: Any damages caused by the use of corrosive and acidic gases are not under the coverage of MTI One Year Limited Warranty.
|
Compliance
| - CE Certified
- NRTL (UL61010) or CSA certification is available upon request at an extra cost
|
Application Notes | - For preserving the longevity of the furnace life, we recommend the heating rate not to exceed 10°C /minThe cooling rate shall also not exceed 10 °C /min
- Small cracks may appear on the surface of the refractory ceramics over extended use. This is a normal occurrence and the cracks may be repaired with alumina coating
|