Structure
| - High purity alumina fiber insulation surrounding the chamber provides maximum energy efficiency.
- Heavy-duty double-layer structure with a cooling fan to keep furnace exteriors safe to touch.
- Doble layer steel case with forced-air cooling to ensure lower safer surface temperature.
- One 2" or 4" Dia. hole is opened from the top of the chamber with a thermal insulation block
- When used as a tube furnace, a quartz tube with a flange will be inserted into the heating chamber.
|
Heating Chamber | - Dimensions: 150mm(D) x 155mm(W) x 180mm(H), ( 6"x6"x7")
- Capacity： 4.2 Liter or 0.44 cubic ft
- Working Temperature: 100-1200 °C continuously in the air or inert gas. ( 1000℃ max if used in vacuum )
- Heating rate: 30°C/ min.
- Temperature Stability: +/- 1.0 °C
- K types thermocouple with Ceramic Sheath
|
|  Pic. 1  Pic. 2  Pic. 3 Pic. 4 Pic. 5 |
Temperature Controller
 | - The digital temperature controller is included.
- Proportional–integral–derivative control (PID control) and auto-tune function
- 30 segments programmed with ramping, cooling, and dwelling steps
- Built-in over-temperature alarm and thermocouple failure alarm
- +/- 1 ºC temperature control accuracy
- Default DB9 PC communication port
|
Temperature controller (optional)
  | |
Power
| - Voltage: 208 -240V Single Phase 50/60 Hz
- 2.5KW ( not suitable for running at 110V )
- Note： Power cable is included but without a plug. The plug would have to be installed by the customer or click the link below the picture to choose a plug according to your country or your lab requirement
|
| Net Weight | 62 lbs |
| Shipping Weight | 115 lbs |
| Shipping Dimension | 40"x30"x36" |
Overall Dimensions
|  360mm(L) x 300mm(W) x 510mm(H) |
| Warranty | - One year limited warranty with lifetime support.
- ATTENTION: Any damages caused by the use of corrosive and acidic gasses are not under the coverage of MTI One Year Limited Warranty.
|
Compliance
| - CE Certified
- NRTL (UL61010) or CSA certification is available upon request at extra cost.
|
| Operation Video |   |
Application Notes
 
| - For a longer service life of the furnace, we recommend to not exceeding the heating rate of 10°C/min.
- The cooling rate should not exceed 10 °C /min either.
- Small cracks may appear on the surface of the refractory ceramics over extended use. This is a normal occurrence and the cracks may be repaired with the alumina coating
- The heating module is easy to replace. Click pic left to order spare the Heating module for replacement
- If firing material releases vapor or smoke, please place the furnace into a fume hood.
|
