Furnace Feature
| - 6" Quartz tube and SS flange as atmosphere control chamber with a vacuum level of 10x10-5 torr. ( inside gold coating is optional for better heating reflection.
- Two tungsten foil or graphite foil disks as the heating element can reach 2900°Cmax. rapidly under low voltage and high current.
- The gap between the two foils is adjustable for various sample thickness
- The vacuum-sealed deadweight can apply to the sample for hot pressing
- IR temperature sensor and the display are available as an option at an extra cost.
|
Furnace Power | - 208 - 240 VAC, 50/60Hz, single phase
- 16 kW transformer with output of 20VAC to heater
|
Heating Elements and DC Power Supply
 | - Two sets of 2" tungsten disc with 0.2 mm thickness are included
- Two sets of 2" graphite disc with 0.2 mm thickness are included
- Max. current: : 500A (DC)
- DC power （3000W） is placed on the bottom of the furnace for easy repair and replacement
|
Max. Operating Temperature | - 2900°C Max.
- 30 seconds Max.
|
Max. Heating Rate | |
Pressure | - Several dead weights are included to apply pressure during heating
- 10Kg Max
- Electric motor with digital pressure sensor is available up to 500Kg at the extra cost
|
Sample size | - Max. 35 mm diameter x 1.0 mm thickness
- You may process multi-samples at the same time for hi-though research
|
Temperature Control
| - There are two heating modes with digital IR temperature senor
- (1) Manual heating with IR temperature display to achieve max heating rate ( ~ 200oC/S)
- (2) Programmable temperature control by IR sensor and digital display
|
Vacuum chamber
| - High Purity quartz with dimensions:
- SS flanges are built-in on the top and bottom with gas inlet and outlet valve and KF 25 port for vacuum pump
- Vacuum level： 10-2 torr by mechanical pump and 10-5 by turbopump
- The digital vacuum gauge is included, and the vacuum pump is optional
   |
Pressure
| - Vacuum sealed and a movable rod is installed on the top flange.
- Two ceramic plates will press on the heating foils, where the sample is located between two heating foils.
- Deadweight with 1000 g each will be adding the rod and applying the pressure to the sample.
- 10 pcs deadweight pieces are included for a total of 10 kg weight
- An electric motor-driven pressure mechanism is available upon request at the extra cost.
|
Net Weight | 60 Kg |
Dimension |  Click the picture to see details |
Shipping Weight | 160 lbs |
Warranty | One-year limited warranty with lift time support (Consumable parts such as processing tubes and O-rings are not covered by the warranty. |
Compliance | - CE Certified
- NRTL or CSA certification is available at extra cost.
|
| Operation Video |  |
