Power | - 110V or 208V selectable, single phase, 50/60 Hz
- 250W
|
Heating Plates
| - Both heating plates are made of heat-resistant stainless steel and built inside the vacuum chamber
- Heating Plates: 50mm X 50mm
- Max Temperature: 500℃ (<30min)
- Continuous Working Temperature: 450℃
- Heating Rate: 10℃/min
- Flatness(Cold) ≤0.005mm
- Max Sample Size: 50mm * 50mm * 15mm
- Heat Power: 200W
|
Temp. Controller
| - Two Precision digital temperature controllers independently control up and bottom heating plates
- Maximum of 30 programmable segments to control heating, dwelling, and cooling
- Temperature accuracy: ± 1ºC, ± 3ºC at 500℃
|
Pressing System
| - Max Pressure: 500Kg/5000N at 500℃
- Dual Mode(manual/auto) Electric Oil-Free Press (30mm stroke)
- Constant Pressure Accuracy(Auto Mode): ±1Kg(±10N)
- Constant Pressure Duration: 1-9999 Minutes
- Pressure Display Range: 1-500Kg
- Pressure Control Range: 1-500Kg [10-1000N]
|
Vacuum Chamber | - Made of 304 stainless steel with stiffener welded to prevent deformation
- Vacuum: <5*10E-2 torr (cold, 30 mins pumping with EQ-FYP-Pump)
- Mechanical Pressure Gauge: -0.1-0.15MPa
- 4-inch Observation Window
- KF25 Port and KF16 Port for vacuum pump
- KF50 Port for heating wiring and thermocouple wiring
|
(Optional) Chilled Water and Vacuum Generation
(Required but not included) | - EQ-KJ5000 Digital Recirculating Water Chiller is required (16L / min Flow, 2.8K BTU/hr)
- EQ-FYP-Pump NRTL Certified 156 L/min Double Stage Rotary Pump is optional ( 10-2 torr )
- EQ-PV-HVS-LD turbo pump is optional (10- 5 torr )
-
|
Dimensions | Main Unit: 220 x 130 x 700 mm (L x W x H) Control Box: 340 X 300 X 140mm (L x W x H) |
Net Weight | |
Warning | - Dust free environment is recommended
- The press will auto reset to its lowest position on start-up, BEWARE
- Scald and Burn Risk, ALWAYS wear protective gear not limited to gloves and goggles
- Gas cylinder pressure is highly recommended ≤ 0.2MPa.
|
Warranty | - Lifetime support
- One-year limited standard warranty (extend the warranty to 5 years at an extra cost)
- Graphite rods are not covered by a warranty
|
Operation Video
| |