Specifications | - Voltage: AC 110V 60HZ ( 2208 - 240VAC is available upon request )
- Power:1.2KW
- Working Pressure: -0.1 ~ 0.3MPa (1100℃)
- Maximum Temperature: 1100℃(≤30min)
- Continuous Working Temperature: 1000℃
- Recommend Heating Rate: ≤10℃/min
- Heating Zone: 200mm
- Thermocouple: K Type
|
Heating furnace
| - Fibrous alumina for thermal insulation
- Double-layer steel structure with air cooling
- Vertical Split door design for easy installation of tube
- Separated temperature control unit
|
Processing tube
Note: If remove the feeder and add hi-pressure fitting, the Max. working pressure can be increased to 10 MPa
| - Nickel base super-alloy tube with flanges. φ30 OD x φ12 IDX 600 L (mm )
- One mechanical pressure gauge(-0.1-0.3MPa) pre-installed,
- The pre-installed Safety relief valve will turn on automatically once the pressure reaches 0.3Mpa (Pic.1)
- One Ni alloy mesh is installed inside the tube center to carry two layers of materials (Pic. 2 &3)
Pic. 1 Pic. 2 Pic.3
- A re-feeder connects the tube with a KF25 port on the tube( which is limited pressure to Max. 3 bars)
- Three different materials can be filled in the re-feeder at the same time by filling into different zones. (50ml each zone) via KF25 adaptor
-
|
Temperature Controller
| - 30 programmable segments for precise control of heating rate, cooling rate, and dwell time.
- Built-in PID Auto-Tune function with overheating & broken thermocouple protection.
- Over-temperature protection and alarm allow for operation without attendant(s).
- +/- 1 ºC temperature accuracy.
- Eurotherm 3000 precision temperature controller is optional with +/- 0.1ºC accuracy
|
Dimensions | 340mm×220mm×1200mm ( L x W x H) |
Net Weight | ~40 Kg
|
Warranty | One-year limited warranty (Consumable parts such as heating elements, processing tubes, and o-rings are not covered by the warranty, please order the replacement at related products below.) |
Laptop & software (Optional)
| - Brand new laptop with Microsoft Windows 10 and Microsoft Office 2013 (30 days free trial)
- Labview Based Temperature Control System (EQ-MTS01) enables the user to edit temperature profiles, manage heat-treatment recipes, record and plot data for MTI furnaces
|
Compliance
| - CE Certified
- NRTL or CSA certification is available at an extra cost
|
Warning
| |
Reference Video | |