KSL-1800X -UL is a bench-top ultra-high temperature muffle furnace built by the components UL recoganized and Kathal HT (1900 grade) MoSi2 heating elements with Max working temperature of 1800 °C. It is ready to pass all safety test world wide.
SPECIFICATIONS
Furnace Structure
•Double shell steel case with cooling fan to keep outside surface cool •High purity alimina fiber insulation for max. energy saving •ZrO2 ceramic liner can stand at working temperature up to 2200 °C •All electriccomponents are UL or Met recognized and ready to pass any safety test worldwide
Dimensions
•Chamber : 160 x 150 x 150 mm (6.3" x 5.9" x 5.9"), 3.6 L •Overall : 515 x 500 x 730 mm (20.28" x 20" x 28.75")
Power
4.8 KW
Voltage
•AC 208V - 240V single phase, •50/60 Hz (50A air breaker required)
Standard Working Temperature
1750 °C (continuous)
Maximum Working Temperature
1800 °C (< 3 hours)
Heating Rate
0 ~ 10 °C / min (suggestion =< 5 °C)
Temperature Accuracy
+/- 1 °C
Temperature Uniformity
•+/- 5 °C over 120 mm (5") @ 1700°C •+/- 2 °C over 80 mm (3") @ 1700°C
•MET certified PID automatic control via SCR (Silicon Controlled Rectifier) power control with phase angle fired, current limiting resistor. •30 programmable segments for precise control of heating rate, cooling rate and dwell time. •Please click here to learn why SCR is more accurate than SSC (Solid state relay). •Built in PID Auto-Tune function with overheating & broken thermocouple broken protection. •Over temperature protection and alarm allows for operation without attendant(s). •+/- 1 ºC temperature accuracy. •RS485 Communications Port •PC control software is included
Power Cable & Plug
•10 feet length 10-3 AWG heavy duty UL approven power cable is included •Extra length cable can be ordered by click picture below •Plug is not included. You can order from your local haedware store according to female plug in your lab, or order from link below (30A plug)
Net Weight
46 Kg (100 lbs)
Shipping Weight
145 lbs
Shipping Dimensions
45" x 45" x 45"
Warranty
•One year limited warranty with life time support. (Consumable parts such as sample plates and heating elements are not covered by the warranty, please order the replacement at related products below.) •ATTENTION : Any damages caused by the use of corrosive and acidic gases are not under the coverage of MTI One Year Limited Warranty.
Compliance
•Furnce : CE certified. •All Components anlentre recognized by UL or equivlent to ensure to pass UL/CSA inspection
Application Notes
•For preserving the longevity of the furnace components, we recommend the heating rate not to exceed 10 °C /min. •Cooling rate shall also not exceed 10 °C /min. •This furnace lacks vacuum sealing, toxic or explosive gases are not recommended for use with this furnace without necessary safety controls and supervision. •Small cracks may appear on the surface of the refractory ceramics over extended use. This is a normal occurrence and the cracks may be repaired with alumina coating. •Please click here to learn how to DIY gas purging system. •Refractory block must be inserted before closing door.
