•Easy to use key pad interface •Holds small or big syringes up to 60 mL •Pumps continuously until you stop the pump •Infusion rate can be changed while pumping •Remembers previous settings on power up •Power failure mode allow pump to continue pumping after a reset •Syringe purge mode •Displays total volume dispensed in mL or µL units •Maximum pumping rate of 25 mL/hr with a 60 mL syringe •Precise reproducible flow rates •Selectable infusion rates units : mL/hr, µL/hr, mL/min, µL/min •Infuses Only Does not withdraw, volume target, or have computer interface
Input Power Requirement
110V AC, 0.75Amps (Transformer available for use with 220V AC power source, please click here to order)
Applications notes
•Pre-metered Horizontal-Dipping Process
Such syringe pump can precisely control the volume of the solution per unit coating area been fed into the gap between the cylindrical barrier and the glass substrate.
•Doctor-Blade (or Wire-Bar) Coating
Such Syring Pump can be used for adding a solvent at various concentrations.
By using multiple syring pumps, you can add ingredient in a certain weight ratio to a mixed solution.
Similar to the Horizontal-dipping Process, the blended organic solution is introduced into the space between the barrier and the substrate by such pumps' capillary action.
The Doctor-Blade is transport horizontally at a given constant velocity, a thin solution layer is then spread and formed evenly on the substrate.
