Power | 100 - 240VAC ( 50/60Hz), 100W |
Structure & Material
| - Materials:
- Chamber: 1.5 mm thick brushed SS304 with tensile strength > 500 Mpa
- Exterior: 3 mm thickness cold rolled steel with tensile strength > 400 Mpa
- Structure: Two anti-explosion chambers, top and bottom
- Chamber Size: 500mm x 500mm x 500mm (x2)
- Testing Cables: Two 3-meter-long cables with clamps are included, Max. current rating is 30A
- Ports: Each chamber has two 2" diameter holes reserved for electric cables of battery testing equipment
- Safety door: The pressure relief door is built on the back of each chamber. In the event of a battery explosion, the door will open and release pressure.
   
- Note: The max. capacity of Li-Ion batteries to be tested in the chamber should be limited to 4.2V@ 40Ah for single-cell or 160Wh for battery pack without protection circus
|
Venting Fan
| - A venting port with a high-quality exhaust fan is installed in the back chamber which shall be connected to your venting system. (ducting and exhaust system are not included )
- Warning: Must keep a venting fan and exhaust system running during battery testing to avoid pressure build-up in the case of a battery explosion.
- Venting fan: 24 VDC, 3425 RPM, 235 CFM, 54.3 dBA
- Centrifugal in-line exhaust fan with aluminum flex duct connection is recommended but not included.
- If you need to control chamber temperature between 23oC - 46oC, we may help you to install a spot air conditioner ad the picture below, at the extra cost
      |
Remote Control
| - A wireless hand-held remote controller can operate the machine within 10 10-meter distance for safe operation.
|
Lighting
| - Anti-explosion LED light (30W) is installed inside of each chamber.
- The angle of illumination is adjustable up to 90°
|
Electrode Holder & Cables
| - Two sets of battery electrode clamps with 10 AWG gauge cables (30A Max.) are included for easy & quick connections to batteries
|
Mobility
| - Four mobile wheels are installed at the bottom for easy transportation
|
Net Weight & Dimensions
| - 220 kg
- L700mm x W630mm x H1800mm
|
| Shipping Weight & Dimensions | |
Battery Testers (Optional)
| A smart battery analyzer for use as the source of over-charging and forced discharging is available here:
|
| Warranty | One-year limited manufacturer's warranty with lifetime support; extended warranty available upon request at additional cost. |
| Demo Video | 
  |
| Application Notes | |
