Ni based super-alloy tube vessel (30mm O.D x 14 mm I.D x 585 mm L).
It can be used under ultra-highly oxidizing and inert gas atmosphere up to 1100°C to process special compounds.
It is consumable part of OTF-1200X-HP-III, which is a compact HIP (hot isostatic pressure) furnace for researching new generation of materials at low cost.
Specification
Outside Diameter
85 mm
Inside Diameter
50 mm
Tube Length
1000 mm
Max. working temperature without load
1100 °C
Working Pressure & Temperature
Maximum pressure inside the tube
Heating temperature
Max. 1958 PSI (13.5Mpa) (140 Bar)
800°C
Max. 1189 PSI (8.2 Mpa) (80 Bar)
900°C
Max. 595 PSI (4.1 Mpa) (40 Bar)
1000°C
Max. 362 PSI (2.5 Mpa) (25 Bar)
1100°C (for <1hr)
•Warning
• Please set up pressure alarm point in digital pressure display before operation • Must install a pressure regulator on gas cylinder to increase pressure gradually. • Service life design for 2,000 hours at 800oC.
The high pressure vessel is consuamble part, please order replacement once found deformation
Installation
Attention
In order get longer tube service life, Please use quartz or alumia crucible to carry sample, instead loading sample directly inside tube, please click picture below to choose one crucible boat :