| Power | 208 - 240VAC (110VAC available upon request), 1KW
|
| Cell Testing compatibility | Compatible with most commercialized Prismatic, Coin, Cylindrical, Pouch batteries
Testing Standards: UN 38.3.4.6, GB31241-2014, GB/T18287-2000... |
| Gravity Mass | Mass can be set at 9.1 Kg or 10 kg. (Deadweight is available for minor adjustment of the impact force)
|
| Drop Height | 600 mm - 1000 mm adjustable |
Horizontal Steel Rod
| - 15.8 mm Dia steel rod is included for the impact test
- Customized diameter is available upon request
|
Chamber
 
| - Anti-explosion reinforced double-layer steel chamber
- Inside chamber: made of 1 mm thickness cold rolled SS304 with tensile strength > 500 Mpa
- Outside casing: made of 3 mm thickness annealed A3 steel with Tensile strength > 400 Mpa
- Explosion-proof window: L 382mm x W 332mm
- Double layer 5 mm thick anti-explosion glass with sandwiched shattering proof film
- Max. Working Space in the chamber: L300mm*W250mm*H1000mm
- Built-in illuminator
- Rolling wheels are installed on the bottom for easy transportation
|
Control Unit
 
| - 6" color touch screen control panel for operating and setting parameters
- Electric motor with worm gear reducer for raising and lowering the weight
- In the case of an electrical outage, the weight will be lowered and locked in position automatically
- Once the parameter setup on the touch screen, a wireless hand-held remote controller will operate the machine within 10 meters distance for the safest operation
|
Venting
| - A venting port is installed in the back chamber which shall be connected to your venting system. Duct included. (exhaust fan is not included)
- Warning: Must keep venting fan and exhaust system running during battery testing to avoid pressure build-up in the case of battery explosion.
- A Centrifugal inline exhaust fan with aluminum flex duct connection is recommended and optional. (Click pic below to read detail)
- The machine should be placed in a fume hood or a well-circulated room
   
|
Safety Door
| - A pressure relief door is on the back of the chamber. In the case of a battery explosion, the door will "pop" to release the pressure inside of the chamber.
- Attention: Do not block the Pressure Relief Door
|
Free Fall Testing (Optional) | - Freefall testing based on IEC-62133-8.3.3 is feasible with electric driven testing fixtures (Picture left). The additional cost will apply, please contact us for more details
- This fixture is only for small single cells. For a larger battery pack, please choose MSK-908
|
| Dimensions | W 800mm x D 700mm x H 1,815mm |
| Weight | 700 kg |
| Shipping Weight & Dimensions | |
| Warranty | One-year limited manufacturer's warranty with lifetime support; extended warranty available upon request at additional cost. |
| Compliance | - CE certified
- NRTL or CSA certification is available upon request.
   
|
| Demo Video | 
  |
| Application Notes | |
