PTL-OV5P (Update from WPTL5-0.01) is a CE Certified Programmable Dip Coater (1 - 200 mm/min) designed to preparing multilayer coating up to 5 solutions inside a temperature controlled oven with touch-screen digital control. Dipping rate, pulling rate, dwell time, and amount of cycles can be setup by touch screen controller. It is designed for R&D Lab to prepare various optical or epitaxial films from liquid solution.
SPECIFICATIONS
Controller
•6" LCD color touch screen controller •Working Voltage : 208 - 240 V AC •Max. Power Consumption : 50 W
Liquid Holder Disk
•Can carry up to 5 liquid solutions •Rotate automatically as programmed •Up to 5 layers of coating can be achieved by rotating liquid holder disk to dip samples from one solution to another
Beaker
•Five 150 mL beakers are included for immediate use •Dimensions : 60 mm (Dia) x 60 mm (H)
Travelling Distance
0 - 75 mm Adjustable
Dipping/Pulling Speed
1 - 200 mm/min Programmable with accuracy within +/- 0.02 %
Temperature Range
50 - 200 °C (+/- 1 °C accuracy)
Dwell Time (in liquid)
0 - 999 seconds
Dry Time
0 - 999 seconds
Amount of Dipping
1 - 10 times in each position
Max. Amount of Cycles
50 times
Sample Holder
Up to 2 samples can be carried sliding up and down through two guide rods
Oven
•Working Voltage : 208 - 240 V AC (110V version is available via transformer) •Max. Power Consumption : 600 W •Chamber Dimensions : 254 mm (L) x 254 mm (W) x 280 mm (H) •Inner Material : Stainless Steel •Outside Dimensions : 406 mm (L) x 406 mm (W) x 610 mm (H)
Product Dimensions
440 mm (L) x 460 mm (W) x 1040 mm (H)
Compliance
CE Certified
Warranty
One year limited with lifetime support
Operation Manual & Video
Application Notes
•In order to get better film coating, the substrate shall be treated by plasma cleaner (Please click on the first picture below for more information) •Use ultrasonic processor to disperse nano powder or homogenize solution to get better coating (Please click on the second picture below for more information) •Liquid solution is placed in the controlled temperature oven with +/- 1 °C tolerance from room temperature to 200 °C. Please keep warm at least half hour after the temperature reach the set point on the digital temperature meter to ensure an equilibrium temperature distribution in the liquid solution •Click here to visit our Knowledge Center and learn about dip coating