EQ-HP-6T is a small pellet press with programmable split furnace, which can apply up to 6 metric tons to the sample at max.1000 ºC. ( Pressure gauge < 10 MP) It is ideal press for preparing ceramic , composite and polymer material sample with higher density.
SPECIFICATIONS
Pressure Max.
6 metric tons ( 10 MP on pressure gauge )
Hydraulic Pump
12T manual pump is built-in on the bottom of frame
Bottom Hydraulic Cylinder Travel Distance
25 mm
Top Support Screw Adjustable Height
150 mm
Heating Chamber & Temperature Control
•Split furnace with 55 mm diameter heating chamber •Max. working temperature : 1100 ºC •30 segments programmable temperature controller with auto tune PID and over-heating protection
Machine Dimensions
292 mm (L) x 279 mm (W) x 546 mm (H)
Net weight
350 lb
Shipping Dimensions
14" (L) x 14" (W) x 25" (H)
Weight of shipment
410 lbs with 48" x 40" x 46" dimension
Press dies & Pushing Rod for hot pressing
•Note : Normal steel dies listed on our website only can work under 250 ºC •Optional : You may use the pressing die and pushing rod which are made of graphite or ceramic materials to press sample at high temperature •Please pay attention for max. working pressure on your die. Never go beyond the die's max. pressure limit at given temperature, otherwise, the die may be deformed or cracked •The pressure applied to the die can be estimated as the below :
○ ( Gauge Pressure x 0.38 ) / (D) , ○ ( D is die 's diameter in CM, , pressure unit is T/cm2 ) ○ For example, die's diameter is 2 cm, pressure shown on gauge is 10 MP, then pressure applied to the die is 1.9 T/cm2 e.g 1900 Kg/cm2, 190 MP
Operation Instructions
Warranty
•The pressing machine was quality inspected in USA, lifetime support is provided •One year limited standard warranty (Extended warranty is available upto 5 years at extra cost)