Die Set Dimensions
| - Two standard electrodes (Cathode & Anode) cutting dies are included for immediate use.
- Cathode Die: 56mm (L) x 43mm (W). With 14mm (L) x 11mm (W) protrude current collector.
- Anode Die: 58mm (L) x 45mm (W). With 13mm (L) x 11mm (W) protrude current collector
The standard cutting die for replacement can be found here: M180SP5643
- Customized dies with Max. dimension 120mm L x 80mm W, including current collector, available at extra cost.
- If used for Li metal foil cutting, a customized cutting die with special blades (surface coated with silicon) should be considered.
|
Plate Pad
| - Use the plate pad to hold the electrode and minimize permanent markings on the base.
- Warning: please don't use other material to replace the pad
|
Cutting Depth | Max. 0.5mm (tested with aluminum laminated film) |
Cutting Accuracy | ±0.1mm |
Cutting Pressure Force | Max. 1T (recommended pressure force for cutting battery electrodes is 0.5T) |
Glove Box Compatibility
| - KF40 Feedthrough with all necessary wire and tube are included to allow operating inside the Glovebox, which has a KF40 port (Click on the picture for details)
- Please use Inert gas when operating in the glove box.
- One KF-40 clamp with rubber O-ring is included
|
Gas Pressure
| - 0.5~1.0Mpa (0.7Mpa is recommended)
- To use inside the glove box, please use compressed inert gas such as Ar
- To use outside the glove box, you may use the air compressor, 60 psi recommended
- Compressor is not included, please click the image below to order
- Attention: If a gas cylinder is used instead of an air compressor(pic2), a two-stage pressure regulator(pic1) must be installed on the gas cylinder to limit the pressure within the required working range for safe operation. Click here to learn the installation of a gas regulator
pic1 pic2 |
Feeding | Manually |
Stroke Length | 12mm |
Cutting Die Life Span | ~30000 strokes |
Compliance | - CE Certified
- No UL required because of no electricity
|
Warranty | One Year limited warranty with lifetime support |
Operation Manual & Video
| How to cut electrode How to make pouch Cell Li-S Line in glovebox How to make single layer pouch cell
|
Product Dimensions | 370mm (L) x 250mm (W) x 245mm (H)
|
Optional | - You may order a pre-formed pouch cell case and other accessories by click the picture below right
- You might order a round cutting die kit to cut coin cell electrodes and separator by click the picture below
- Please consider a 3 in1 sealing machine to make pouch cells
-
|
Application Notes
| - A perfect fit for the cases formed by the standard size MSK-120, with no rough edge, clippings, or creasings
- The shape of the electrodes it produces is also handy for the later processing steps such as tab welding by MSK-800 and electrode stacking by MSK-111A
- Compact design enables the operation inside the glove box with Ar atmosphere where Lithium Sulfur, Lithium Air, Lithium Solid State or Li-ion half cell will be assembled. Please click the images in below to understand these technologies and how it fits in a glove box
|
Net Weight | 32kg
|
Shipping Weight & Dimensions | 110 lbs; 40" x 25" x 20" |