Features | - Welding time, delay time, welding layers...adjustable, click Pic. "Program Setup Interface" to see details.
- Preset welding programs selectable for Al and Cu (Note: Welding power can be readjusted to fit the needs for welding other types of metals such as Au, Fe, Ni, Ag...);
- Up to four recipes can be stored in the Al or Cu welding programs.
- Amp meter provides instant monitoring of the welding current
Program set up Interface Save up to four different recipes Controller's Front Controller's Back |
Power | Input Voltage: AC 110V or 220V +/-10%, 50/60Hz (Please select in the product options bar)
|
Power Consumption | Input power: 550W Output power from Ultrasonic: 800W (Max 15 layers) |
Welding Area | 4mm(L) x 4mm(W) |
Welding Head | - Two sets of welding heads and welding bases are included for welding both aluminum & copper current collectors from 1 to 15 layers
- One set of the welding head and base is pre-installed.
- Three-pin welding heads and single-long welding heads are available for high throughput welding for both aluminum and copper current collectors. Please click here for more options.
- The three-pin head can be used with only 5 or fewer layers.
|
Ultrasonic Frequency | 40K Hz |
Pneumatic Control (Not included) pic1 Pic. 2
| Air pressure at 85 psi is required for the operation (Air Compressor is not included. Please click here to order) Attention: If a gas cylinder is used instead of an air compressor(pic2), a two-stage pressure regulator(pic1) must be installed on the gas cylinder to limit the pressure within the required working range for safe operation. Click here to learn about the installation of a gas regulator.
|
KF40 Feedthrough
| - A modified version of MSK-800W-AR can be safely used in the Ar gas condition.
- Please order the modified version of MSK-800W-AR ( with Feedthrough included) to use in the glove box.
|
Product Dimensions | - Controller: 481mm(L) x 188mm(W) x 375mm(H)
- Welder: 513mm(L) x 220mm(W) x 275mm(H)
|
Compliance | CE Certified NRTL certification is available upon request at the extra cost |
Warranty | One Year limited warranty with lifetime support |
Operation Manual & Video
| |
Net Weight | 50 kg (110 lbs) |
Shipping Weight & Dimension | |
Application Note | - The MSK-800W ultrasonic welder can't be used in the Ar gas condition because electric arc occurs during the process. Use N2 gas if needed.
- Nickel and Aluminum Tabs can be welded onto different types of current collecting substrates (Aluminum or Copper) when making battery electrodes.
- A modified version MSK-800W-AR can be safely used in the Ar gas condition. KF-40 feedthrough is provided which separates the control unit from the glovebox (only welding unit is inside the glovebox) and delivers the operating gas from the gas cylinder (or air compressor) outside the glovebox to the welding unit inside the glove box. Please contact us for the quote of MSK-800W-AR in advance if the Ar gas operating atmosphere will be considered.
- The compact design enables the operation inside the glove box with an Ar atmosphere where Lithium-Sulfur, Lithium Air, Lithium Solid-State, or Li-ion half cell will be assembled. Please click the images in below to understand these technologies and how it fits in a glove box.
|