Model (MSK-ESDC-3000) and Features (Combination)
 
|
• The combination of MSK-DC-3000 and MSK-MD-300， which is separable.- • DIY electrospinning system with drum collector and oscillation fixture
- • Manually adjusting space between the drum collector and oscillation fixture
- • 24VDC motor an Ar gas environment compatible
- • Note: MSK-ESDC-3000 can be purchased in one full set, or separately. For more information,
please contact us. To built the DIY high voltage electrospinning process, there is more
equipment that might need to built-in with. The example can be shown below:
|
Model |
Drum Collector (MSK-DC-3000)
|
Oscillation Fixture (MSK-MD-300)
 |
Features
|
• Drum collector with adjustable rotation
speed and digital speed display - • Compact, modular design enables DIY
flexibility - • Rotation speed: 100 - 4500 rpm
adjustable - • Speed accuracy: +/- 5 rpm
- • Drum size: 80 mm Dia. x 200 mm L
|
• Syringe needle holder to mount up
to 6 needles (6 slots of 12 mm Dia. )- • Two adjustable positions limit
sensors to control the fixture
movement distance - • The needle head suggested having
100-200mm distance with collector
drum - • Fixture movement distance: 50 –
270 mm
|
Input Power
|
• 208 ~ 240 VAC 50/60 Hz, 50 W- • To use the unit at 110 V, a 100 W small
transformer, can be ordered at MTI at
extra cost
-
 
|
• 220 VAC 50/60Hz, 50W- • To use at 110 V, a 100 W
transformer, can be ordered at MTI
at extra cost
-
|
Dimension Size |
• Controller box: 125mm L x 210mm W x
105mm H- • Collector part: 430mm L x 160mm W x
150mm H
|
• Controller box: 120 L x 200 W x 85H
(mm)- • Fixture Part: 400L x 120 W x 370 H
(mm)
|
Optional (Not Included) |
• To builds a DIY electrospinning system, you may need- º A high voltage power supply (Click Pic 1 to order)
- º A syringe pump controller to deliver polymer solution (Pic 2 & 3)
- º Ultrasonic spray head ( click Pic.4 to order )
- º An X-Y stage for uniform coating onto a plate collector (Click Pic 5 to order)
- º A fume hood to enclose the system for safety and health (Click Pic 6 to order)
 1  2  3
 4  5  6
|
| Warranty | - • One-year limited warranty with lifetime support.
|
| Shipping Weight | |
| Operation Instruction |  
|
Application Notes |
• The ability to generate aligned fibers and the degree of alignment depending on the
polymer- solvent combination, viscosity, applied voltage, tip-collector distance, and
drum rotation speed. User shall do an experiment for best results- • Use a properly grounded electrical outlet and away from sources of electromagnetic
interference. Improper grounding may cause charge build-up and damage the unit - • The electrospinning process uses HIGH VOLTAGE! Stay clear of the syringe needle or
drum collector during the process to avoid electric shock! Beware of short circuit damage
to the unit due to leaking or a short distance between charged syringe needle and drum
collector - • Solvents and chemicals used for electrospinning may be poisonous, flammable, oxidizing,
or corrosive. It is the user’s responsibility to understand the risks associated with the process
and use proper protection. The user is advised to wear protective clothing, mask, goggles,
and gloves. The electrospinning process should be confined in an enclosed chamber,
such as a fume hood, with proper exhaust handling capability
|
