• Standard rate: 15Amp ( Recommended and warranted) • Highest rate for continuous running: 30Amp • Max. Rate for short time: 42 Amp ( Not recommend as working rate )
Pre-wired
• 3 terminals with 14 AWG wire and standard Tamiya female connector. Each terminal has 12V DC output.
• When discharging, please use 3 to 1 Tamiya Connector ( included) to connect three 12V Modules in series and form a 36V 4.2Ah battery pack.
Dimension
9" L x 3" W x 1.8" H
Net Weight
4 lbs (1842 g)
Tips
• You shall use three our 7.2-12V Universal smart charger , or three channel smart charger to charge each 12V battery module, as shown the picture below. Charging time is about 3 hours.
• You may choose other connectors listed in our store and put it to the end of 3 to1 adaptor without extra cost
Applications
• Idea for replacing Lead acid batteries of electric bikes and scooters because of less weight, more power and Environmental friendly.
• Can be used for high current drain 36V DC device as robot, e-bike and RC car.
Cautions
• Please don't discharging the battery pack below 30V ( 1.0 V / cell) Deep discharging may damage NiMH battery pack.
• Charging battery immediately every time it is discharged. Never storage the battery pack at below 30V.
• Please read the safety warning from the link
How to Charge and Use the battery pack
• In order to achieve the best power balance during charger, you shall charge each 12V battery modules in same time separately.
• In order to discharge, you shall plug 3 to 1 connector (series connected ) into each 12V pack 's plug, then make 36V 4.2Ah battery pack.
