Induction Heater
| - Working Voltage: 220V AC, 50/ 60Hz, Three Phases ( 380VAC, 3phase available upon request )
- Working Current: 5~52 Amps (60A breaker required)
- Max. Input Power: 15 KW
- Output Frequency: 30 - 80 kHz
- Duty Cycle: 80%
- Induction Coil: 220mm(ID) x 65mm(H)
- Air Cooling: Rear Fan
- Protection: Automatic water pressure, over-temperature, and overpower protection
- Refractory Assembling: Complete refractory assembling made of alumina, including bottom crucible support, crucible holder, and cover
|
Temp. Controller & Thermocouple
| - Precision digital temperature controller with Automatic PID tuning
- 30 segments programmable for controlling heating and cooling rate as well as dwell time.
- Overheating & thermocouple failure protection.
- +/- 3 ºC temperature accuracy.
- +/- 3 ºC temperature accuracy.
- Thermocouple: C type ( 1/4"x10"L ) ( pls click here to order spare as consumable )
- Continuous Working Temp. Range: 1000ºC~1900ºC
- Max. Working Temperature: 2000ºC (for less than an hour)
- Max. Heating Rate:
- 4ºC/second (1000ºC-1200ºC)
- 3ºC/second (1200ºC~1500ºC)
- 1ºC~2ºC/second (1500ºC~2000ºC)
- Optional： Eurothermo Controller with +/- 0.5ºC accuracy at the extra cost
|
Graphite Crucible & Refractory liners
| - High Purity Graphite Crucible: 114 mm O.D x 100 mm ID x 142mm Height is included for induction heating. Max. Loading Capacity: Up to 1/2 of the total volume of the graphite crucible.
- Max. melting capability: 4 kg for Iron (tested)
- Three-layer special design refractory liner can withstand temperature up to 2200C.
- Note: Graphite crucible is consumable, please click picture below-right to order spare
 
|
Sealing Flanges
&
Quartz Chamber | - Two-end Open Quartz Tube is included with dimensions of 216 mm(OD) x 208 mm(ID) x 500mm(L), ( click picture below-left to order spare or replacement )
- Top Flange: Stainless steel hinged type flange with 1/4'' thermocouple feedthrough, needle valve, and the barb fitting. Please click the picture (bottom right) to view details.
- Bottom Flange: Stainless steel flange with a needle valve and KF-25 vacuum port. Please click the picture (bottom-left) to view details.
- KF25 right angle valve& clamps and 1000mm long SS bellows are included for connecting to vacuum pump
   
|
Pressure Sensor
| - Anti-Corrosive Capacitance Diaphragm Gauge (Gas Independent), measurement range up to 3.8x10E-5 torr
- One 24V,1A DC power adapter is included and ready to use. Input voltage for the adapter is 110~240V Single Phase.
|
Flow Meter
  | |
Water Chiller
| - Temperature range: 5 - 30°C
- Water Flow Rate: 58 L/m
- Note: It is recommended to use specific coolant to get the best performance.
|
Vacuum Pump
| - One 156 L/m Rotary Vane Vacuum Pump is included
- Rate: 156 L/min up to 10e-2 torr vacuum.
- Max. Power Consumption: 0.4KW / 0.37KW
- For US customer, 110V Vacuum pump will be included
- If you choose high-speed turbo-pump, vacuum level can reach 10- 5 torr
  ( Hi-Speed turbopump)
|
Heavy Duty Mobile Cart
| - Structure: Steel Frame Mobile Cart
- 600mm(L) x 800mm(W) surface for placing Induction Heater & Quartz Tube with Flange
|
Protective Sheild
| - For Non-UL Certified version, a protective shield made of phenolic sheets will be provided.
- For UL Certified version, a clear protective shield made of polycarbonate will be provided.
- The protective shield is to be placed around the quartz tube to contain the shooting glass shards if accidents were to happen.
 
|
Product Dimensions
|  Please refer to the picture to the left for overall size info. |
| Warranty | - One year limited warranty with lifetime support
- Consumable parts such as processing tube, thermocouple, refractory liners, o-rings and heating coil are not covered by the warranty
|
| Compliance | - NRTL Certification is available upon request at extra cost, please contact us for a price quote. Certify standards include: 1) Induction heater: UL61010-1 & UL499; 2) Vacuum Pump: UL1450; 3) Water Chiller: UL61010 & UL1995
|
| Operation Manual & Video |  
|
Application Notes
Click here to learn more about the installation of a gas regulator. | - Attention: Protective inert gas must be continuously filled throughout the experiment in order to protect the graphite crucible and C thermocouple. The gas flow rate should be limited to <200 SCCM
- The C type thermocouple is consumable which is not covered by manufacturer warranty.
- Please click here to learn how to setup crucible for melting
- The Induction Melting System is designed for use under vacuum and low pressure < 0.02 Mpa
- Attention: A two-stage pressure regulator must be installed on the gas cylinder to limit the pressure to below 3 PSI for safe operation. Click here to learn the installation of a gas regulator.
- Never heat the furnace while the gas release valve is closed and a positive pressure condition exists within the furnace chamber. The pressure gauge must be used to closely monitor the chamber condition at all times during the heating process; please open the gas release valve immediately once the chamber pressure has reached over 3 PSI to prevent unforeseeable damages.
- PVT ( Physical Vapor Transportation ) system for growth bulk SiC crystal by changing a suitable crucible, please Pic below or ask our engineers how to
- This furnace can be modified as RTP ( rapid thermal processing ) and HPCVD system with the gas delivery system. Please click the link below to see how. If you have any special requirement, please let us know
  - For customization inquiries, please complete the "Customize Induction Heating System Form" and return it to info@mtixtl.com
|
Net Weight
| 350 lbs |
| Shipping Weight | TBD |
| Shipping Dimensions | TBD |
