• 
       •  High purity alumina fiber insulation surrounding the chamber provides maximum energy efficiency.
•      •  Heavy-duty double-layer structure with a cooling fan to keep furnace exteriors safe to touch.
•      •  18 heating elements installed on top and both sides.
•      •  Vent port installed on top doubles as an outlet for gas flow.
  
•      •  A 0.5" diameter observation window made of quartz glass allows the user to see inside the chamber.
•      •  A protection latch is installed to prevent accidental explosive damage
•      •  An interlock is installed to cut off power as soon as the door is open
•      •  The fibrous heating module is replaceable at low cost ( click pic below right to order )
•      •  Optional Al203 sample plate can also be ordered for this furnace.
  
                     
  
  

• 
       •  Muffle furnace in the front for oxidized material.
•      •  Two 2" O.Dx12"L . atmosphere-controlled furnace tubes are included in the back for vacuum or inert gas ( < 3 PSI)
•      •  Two tube blocks are included to replace the tubes for using the furnace solely as a muffle furnace.
•      •  The furnace can be customized as 12 quartz tube (1") with flange for high throughput annealing 12 sample with
          a different composition at the same temperature.

Quartz tube w/ one end closed	Furnace Tubes at the Back	Muffle/Tube Properties	Interior	Furnace Tubes	Tube Blocks	Customized 8 -12 tube (0.75 -1")

• 
       •  Two single side vacuum flanges with vacuum gauge and K25 vacuum port are included.  
•      •  The flange has spare 1/4" ID port to insert a spare thermal couple or electric property testing fixture inside
          processing tube.  Please click picture below-left 2-3  to order them separately.
•      •  Vacuum level can reach 10e-3 by a mechanical pump and 10e-5 torr by a turbo pump.  
         Click the picture below to order pump separately
•      •  Optional： This furnace can be modified into multi-temperature display as pic below right 2
•         Sing  tube with with vacuum flangeis is available Pic. below righ 1
  
  

 

• 
       •  12" D x 8" W x 5H" (300 x 200 x 120 mm)
•      •  480 cubic-inch or 7.2 Liter
•      •  Click picture to see details  
  
  

• 
       •  FA-YD518P-AG temperature controller is included.
•      •  Proportional–integral–derivative control (PID control) and auto-tune function
•      •  30 segments programmed with ramping, cooling and dwelling steps
•      •  Built-in over-temperature alarm and thermocouple failure alarm
•      •  +/- 1 ºC temperature control accuracy
•      •  Default DB9 PC communication port
•      •  MET Certified
  
  

• 
       •  MTS02-Y Temperature control software kit (for YD518P series controllers) + 15" laptop package is available at the
          options bar. Click for the detail information about the MTS02-Y software kit.
  
•      •  You may upgrade the temperature controller to the Eurotherm Temperature Controller which is fully compatible with
          LabVIEW. This package includes a Eurotherm programmer, a communication cable (RS485 - USB) and a software
          CD. Click the pic below to view the full spec of the Eurotherm temperature controller.           
  
  

• 
       •  25" x 21" x 27" / 635mm x 535mm x 670mm (D x H x W)
•      •  Flanges in the back add 100mm in depth
•      •  Leave extra space to slide out tubes and thermocouples in the back.

• 
       •  One-year limited warranty with lifetime support.  
•      •  ATTENTION: Any damages caused by the use of corrosive and acidic gasses are not under the coverage of
          MTI One Year Limited Warranty.
  
  

• 
       •  CE Certified
•      •  All electric components ( >30V) are UL / MET / CSA certified
•      •  The furnace is ready to pass TUV(UL61010)  or CSA certification at extra cost. (pls click mark below to learn details)
  
  
•                      
  
  

• 
       •  For preserving the longevity of the furnace components, we recommend the heating rate not to exceed 10 °C /min.
•      •  The cooling rate shall also not exceed 10 °C /min.
  
•      •  This furnace lacks vacuum sealing, toxic or explosive gasses are not recommended for use with this furnace without
          necessary safety controls and supervision.
  
•      •  Small cracks may appear on the surface of the refractory ceramics over extended use. This is a normal occurrence
          and the cracks may be repaired with alumina coating.
•      •  Click the pic left to choose a crucible