Case Dimensions | Outside Dimension after sealing: 5 Thickness x 45 Width x 62 Length (mm)
|
Net Weight | 200g (50 pcs) |
Layers from outside to inside (material in bracket) | Polyamid (JIS Z1714): 0.025mm(+-0.0025mm) Adhesive (Polyester-polyurethane): 4-5g/m2 Aluminum foil (JIS A8079,A8021): 0.040mm(+-0.004mm) Adhesive (Urethane-free Adhesive): 2-3g/m2 Polypropylene: 0.040mm(+-0.004mm) |
Thickness: | 111μm±11μm |
Surface Quality | Matte finish |
Pinholes | Subject to the applicable aluminum foil standard |
Impurity | 1mm or less in diameter |
Fish Eye | 2mm or less in diameter(clear),1mm or less in diameter(colored) |
Moisture Vapor/O2 Transmission Rate | 200ppm / 5 years |
Laminate Strength | Nylon/Al more than 2N/15mm Al/CPP more than 5N/15mm |
Heat Seal Strength | More than 29.4N/15mm wide at 200℃ x 0.2Mpa x2 sec by MTI's heat sealing equipment MSK-140 and MSK-115A |
Solvent Retention | Less than 5mg/m2 |
Appearance | Within the sample of the limit |
Optional
| - You may use the compact die cutter to make electrode sheet and fit into the case
|
Application Notes
| Click picture below to learn how to make a polymer battery: |
Videos | |