Features
| - Linear configurated 5 syringe needles ensures a uniform coverage over up to 160mm width.
- Automatic roll to roll system with precise rolling speed control.
- Heating bed up to 100C for coating bake-out.
- Syringe pump provides a constant stream flow of polymer base solutions.
- Single voltage supply cable minimizes the repulsion of the jets between the spraying heads.
- Removable spraying heads accommodates various coating widths.
|
Spraying Head (Needle) and Supporting Stand
| - Hight and position adjustable supporting stand
- Removable Spraying Heads (up to 5 needles).
- Single Voltage input cable minimizes the repulsion of the jet between the needles.
- Distance between each needle: 25mm
- Needle O.D.: 0.9mm
- Needle I.D.: 0.6mm
- Needle Length: 12mm
- Maximum distance from needle to heating bed: 235mm
- Minimum distance from needle to heating bed: 70mm
|
High Voltage Power Supply
| - 0 - 50 kV single output, 1 mA max current
- Digital voltmeter and current meter
- Output voltage and current can be set by using knobs on the front panel and read from the digital display
- Constant current / constant voltage modes available
- AC 220V, 50/60Hz, 50W max power consumption
- Dimension: 155mm(L) x 245mm (W) x 125(H)
|
Syringe Pump
| - LCD touch screen controlled infusion syringe pump for precise solution feeding.
- Easy to use.
- Pumping rate 0.1 - 45mm/min
- Travel Range: 0.001 - 120mm
- Micro speed adjustment : 0.01 - 8mm/min
- A 250ml Syringe is included for immediate use.
- 208 - 240 VAC
- Dimension: 300mm(L) x 265mm(W) x 260 mm (H)
|
Heatable Vacuum Bed
| - Vacuum Bead ( chuck ) for holding substrate in flat with dimension: 600mm(L) x 300mm(W)
- Vacuum Bead is heatable up to 100ºC for solution drying
- PID temperature controller with the precision of +/- 1C.
- 208 - 240 VAC, single phase , 50/60Hz
- 2000W Max Power.
|
Roll to Roll System
| - Compact roll to roll system up to 200mm width
- Motor rpm (Controller display) Range: 1 ~ 41rpm
- Gear Head's reduction ratio: 100k
- Actual substate traverse speed range: 2.2 mm/s ~ 117.2 mm/s
- 110VAC
|
Dimension
| - Heatable Vacuum Bed with the Roll to Roll system and stand
- Total dimensions: 805mm(L) x 435mm(W) x 565mm(H)
- The height of the Vacuum Bed: 180mm.
- The height of needle holder: 385mm.
|
Sample Display
| - The picture below is the result of the electrospinning coating experiment that conducted by MTI using the mixture of PVDF and DMAC with the weight ratio of 1:20.
|
Warranty | - One-year limited warranty with lifetime support
|
Optional | - You need to place the system into a fume-hood to protect environmental.
|
Operation Instructions | |
Reference Article | |