Working Voltage | - 208 -220V, 50/60 , 3 phases, ( standard )
- 380V, 50/60 Hz, Three Phase ( optional)
- 460V, 50/60 Hz, Three-Phase available upon request
|
Max. Power Consumption | 30 KW ( 100A Air breaker required ) |
Coating Method | Transfer coating method for better density and uniformity ( Pls click Pic below to see detail )
|
Max. Coating Width | 400mm |
Coating Speed | Max. 4 meter / minute |
Thickness Precision | ± 3µm (± 5µm at edges) |
Max. Drying Temperature
| 150°C
|
Temperature Accuracy | ±1°C |
Heating Zone Length | 4.5 Meter （ 3 zones， 1.5 meters per zone ) |
Reeling/Unreeling Shaft
| 75mm (ID) |
Max. Reeling/Unreeling Diameter | 250mm (OD) |
Max. Coating Length
| - Depending on coating and substrate thickness.
- Typically, 10um thick foil with 100um coating can get 600 meters of electrode length coated per run
|
Slurry Stirring
| SS316 Moving Rod
|
Compressed Air | 0.5-0.8 MPa (Air compressor not included. Please click here to order)
Attention: If a gas cylinder is used instead of air compressor(pic2), a two-stage pressure regulator(pic1) must be installed on the gas cylinder to limit the pressure within the required working range for safe operation. Click here to learn the installation of a gas regulator.
 pic1  pic2
|
Optional | You may order Dual-Filtration System for NMP Vapor and connect it to the coating system for keeping environmental healthy. 
|
Product Dimensions
| L6500mm x W1200mm x H 1600mm
  
|
Compliance | - CE Certified All electric components ( >24V) are UL / MET / CSA certified
- The furnace is ready to pass TUV(UL61010) or CSA certification at extra cost.（ please click mark below to learn details )
   
|
Warranty | - One Year limited warranty with lifetime support
- Rusting and damage due to improper storage condition or maintenance are not covered by warranty
|
| Operation Manual & Video |   
|
| Application Notes | - Please use Acetone to clean and dry the doctor blade, slurry feeder, and roller to avoid rusting
- Customers are welcome to visit our facility to receive technical training before shipping of equipment (Please schedule an appointment with us in advance)
- On-site Training is available for customers within the US only (Expenses will be covered by customers)
- Test the flexibility of the coated electrode with EQ-MBT-12-LD mandrel bending tester. ( Click pic.1 below for detail.)
- PET Film with single side Si Coating is available for Roll-to-Roll tape /slot die/ Micro Gravour casting of Li- ion battery electrode slurry, ceramic, functional resin, ink, and others. Please click the Pic.2 in below to view the product.
 
Pic.1 Pic.2 |
| Net Weight | 1000 kg |
| Shipping Dimension | TBA |
