The 3D Graphene Foam is made via chemical vapor deposition (CVD) processing. In course of CVD fabrication of graphene hydrogen and methane gases are introduced into a furnace that heats to 1000° Celsius. In the furnace is a nickel or copper film which captures a mono or multi-layer or graphene as the furnace is heated and the methane decomposes. To create CVD Graphene Foam, instead of using a thin sheet of nickel to capture graphene, nickel or copper foam is used. The metal foam captures graphene in a similar foam structure. The metal skeleton is then etched away and left is a visible, porous 3D graphene foam structure. This structure has a high surface area, which opens several exciting applications for Graphene Foam while maintaining most of two-dimensional graphene’s properties1. CVD processing of Graphene Foam opens a cost-effective route for engineering a new class of ultra-light, highly conductive graphene-based materials with exceptional mechanical strength, flexibility, and elasticity.
SPECIFICATIONS
| • Sample size: 2"x2"- • Thickness: 1.2 mm
- • Carbon content: 99%, no metal support
- • Density: 4 mg/cm3
- • Pore Size: 580 microns
- • Packing: in sealed membrane box
|
XRD
| |
Application Notes
| • Assembly of Li-Air Batteries, please click the picture below to learn. • You may use rolling machine to make thinner carbon foam sheet ( < 0.08 mm)
|