Working Voltage | 220V AC, 50/60Hz, Single Phase |
Max. Power Consumption | 4KW |
Glove Box Chamber
| • Case Material: Stainless Steel 304- • Dimensions: 3600mm(L) x 800mm(W) x 930mm(H)
- • 12mm thick double layer laminated safety glass with
- corrosion protection film for operating in a safe and
easy manner - • Ample space for cell fabricatoin line.
|
Chamber Condition | • Water concentration: <1 ppm (20°C, 1 atm)- • Oxygen concentration: <1 ppm (20°C, 1 atm)
- • Leak rate: <0.05 Vol% / hr (Depending on oxygen
concentration inside the glove box)
|
Air-lock Chamber
| • Antechamber Dimensions: 385mm(Dia.) x 588mm(L)- • Small Chamber Dimensions (for tools): 150mm(Dia.)
x 300mm(L)
- • Max. vacuum level: 100 Pa
|
Working Gas | • Operating gas: Inert gas such as N2, Ar, He- • Regenerating gas: Mixture of H2 (5%) and
Operating gas - • For purification system with only water adsorbing
function, Regenerating gas will be the same as Operating gas
|
Filter System | • Organic Solvent Filter System filled with replaceable activated carbon- • Built in HEPA filter can eliminate particle size >
0.3μm
|
Control system
| - • Siemens PLC control system with 6" touchscreen
display - º Water concentration: 0 - 1000 ppm with
an accuracy of 0.1 ppm - º Oxygen concentration: 0 - 1000 ppm
with an accuracy of 0.1 ppm - º Pressure: -2500 to 2500 Pa with an
accuracy of 1 Pa
- • Purification limitation:
- º Water concentration: <1 ppm (20°C, 1 atm)
- º Oxygen concentration: <1 ppm
(20°C, 1 atm)
- • Note: you may request to purify H2O only to
simulate industrial fibrication condition and save $3000 around
|
Pump
| • 240L/m Heavy Duty Double Stage Rotary Vane Pump for faster gas exhaust- • Vacuum rate: 7.8 cfm
- • Lowest pressure: 0.4pa
|
Blower | Flow Rate: 90m³/h |
Purification Pipeline | 304 Stainless Steel, KF40 Port |
Gloves | A pair of NORTH Butyl glove is included to provide better protection against toxic materials
|
Lighting | Built-in fluorescent lamp |
Slidable Shelf | • Two slidable shelves are built in top of inside glove chamber with dimensions of 300mm x 250mm- • 300mm away from roof
|
Product Dimensions | 4200mm(L) x 830mm(W) x 1830mm(H) (165" x 33" x 72") |
Shipping Dimensions & Weight | TBD |
Optional | • Heatable Antechamber: 200C max., DN385×588mm (L), extra cost $7699- • 5" tube furnace with bottom loading is available on
one of top glovebox for oxygen free sintering
|
Operation Instructions |
- Li-S battery pototype line in the glovebox
|
Warranty | • One Year limited warranty with lifetime support- • Rusting and damage due to improper storage
condition or maintenance are not covered by warranty - • Gloves are consumable items and are not covered
under warranty
|
Application Notes & Warnings | • The interconnections between the glove box chamber and the gas purification system must be unimpeded during the purification cycles. - • The use of corrosive gases is prohibited as they will
damage the water and oxygen sensors. - • Regularly perform regeneration to maintain the
optimum purification efficiency. - • The O2 removing rate is largely dependent on the
type of purging gas used. For faster chamber purging process, Nitrogen is preferred over Argon due to its lighter mass. - • Corrosive liquid (such as LiPF6 electrolyte) must be
remain sealed in a container inside the glove box. Otherwise, liquid vapour may condense and corrode the steel chamber and purification pipeline
|