| Working Voltage | - • AC 220V 50/60 Hz Single Phase
|
| Max Power Consumption | |
Glove Box Chamber
|
• Material: Stainless Steel 304- • Dimensions: 4800 mm (L) x 800 mm (W) x 930 mm (H)
- • 12 mm thick double layer laminated safety glass with
corrosion protection film for operating in a safe and easy
manner - • Ample space for the cell fabrication line
|
| Chamber Condition | - • Water concentration: < 1 ppm (20°C, 1 atm)
- • Oxygen concentration: < 1 ppm (20°C, 1 atm)
|
| Leak Rate | - • <0.05 Vol% / hr (Depending on oxygen concentration
inside the glove box)
|
| Airlock Chamber |
• Two Antechambers and two small chambers on both
sides of the glove box- • Antechamber Dimension: 385 mm (Dia.) x 588 mm (L)
- • Small Chamber Dimension: 150 mm (Dia.) x 300 mm (L)
- • Maximum vacuum level: 100 Pa
|
Working Gas |
• Operating gas: Inert gas such as N2, Ar, He- • Regeneration gas: Mixture of H2(5%) and Operating gas
- • For purification system with only water adsorbing function,
Regenerating gas would be the same as Operating gas
|
Filter System |
• Two Purification Cylinders included due to the large glove
box- • Organic Solvent Filter System filled with replaceable
activated carbon - • Built in HEPA filter can eliminate particle size > 0.3μm
|
Control System |
• Siemens PLC control system with 6" touchscreen display- º Water concentration: 0 - 1000 ppm with an
accuracy of 0.1 ppm - º Oxygen concentration: 0 - 1000 ppm with an
accuracy of 0.1 ppm - º Pressure: -2500 to 2500 Pa with an accuracy of 1Pa
- • Purification limitation
- º Water concentration: <1 ppm (20°C, 1 atm)
- º Oxygen concentration: <1 ppm (20°C, 1 atm)
|
Pump
|
• 240 L/m Heavy Duty Double Stage Rotary Vane Pump
for the gas exhaust- • Vacuum rate: 7.8 CFM
- • Lowest pressure: 04 Pa
|
| Blower | |
| Purification Pipeline | - • 304 Stainless Steel, KF40 Port
|
Gloves |
• A pair of NORTH Butyl glove is included to provide better- protection against toxic materials for one chamber
- • Four pairs in total
|
| Lighting | - • Built-in fluorescent lamp
|
Slidable Shelf
|
• Four slidable shelves are built on top of inside glove
chamber with dimensions of 300mm x 250mm- • 300 mm away from the roof
|
Optional |
• Universal terminal panel is a convenient part with varies
feedthrough built-in for VGB series glove boxes to transfer
gas/vacuum pipelines, circuit cables, etc.- • Dimensions: 420x280mm
- • Adapter: 10 Φ6 ports, 4 Φ8 ports, 4 Φ12 ports
- • Heatable Antechamber: 200C max., DN385×588mm
(L), extra cost $7699
   
|
| Product Dimensions | - • 6500mm(L) x 830mm(W) x 1830mm(H) (256" x 33" x 72")
|
| Shipping Dimension & Weight | |
Operation Instructions | |
Warranty |
• One-year limited warranty with lifetime support- • Rusting and damage due to the improper storage
condition or maintenance would not be covered by warranty - • Gloves are consumable parts and are not covered by
warranty
|
Application Notes & Warnings |
• The interconnections between the glove box chamber
and the gas purification system must be unimpeded
during the purification cycles. - • The use of corrosive gasses is prohibited as they will
damage the water and oxygen sensors. - • Regularly perform regeneration to maintain the optimum
purification efficiency. - • The O2 removing rate is largely dependent on the type of
purging gas used. For faster chamber purging process,
Nitrogen is preferred over Argon due to its lighter mass. - • Corrosive liquid (such as LiPF6 electrolyte) must be remain
sealed in a container inside the glove box. Otherwise, liquid
vapor may condense and corrode the steel chamber and
purification pipeline
|
