| Operation Flowchart: | Chamber Evacuation/vacuum -> Needle Down -> Pierce the Excess Area of the Pouch -> Needle Up -> De-gas the Pouch -> Heat-Sealing -> Release to atmospheric pressure |
| Working Voltage | AC110V or 220V, 50/60Hz (please select the voltage in the options menu)
|
| Power | 600W |
Working Area
| - MAX. Battery Placing Area: 340mm (L) x 340mm (W) x 12mm (H)
- Refer to the Standard sealing area pic below to find out the maximum size of the battery pouch that can be placed in the working area.
- Updated 01/09/2020: The bottom working area will be flat or tilted by a single button on the side. Please look at the pictures below
-
 
|
Spring Loaded Pressure Board
| - Equips with a Spring Loaded Pressure Board to push air out of the pouch cell before vacuuming
- Produces a much tighter and neater sealing result
- Max. working pouch cell thickness: 12mm
- For sealing pouch cells that are thicker than 12mm, simply remove the pressure board
|
| Sealing Blade & Bayonet | - The sealing blade is made of copper with a thermal conductive layer
- Six piercing needles. are built-in for the function of Bayonet, which is selectable via a switch on the left side of the case ( New function since Dec. 2021 ) Pic. 2
|
Glove Box Compatibility
| - A KF40 Feedthrough for Glovebox is included in the package.
- Please use high-purity inert gasses (Ar or N2), when operating in the glove box. Using Air Compressor driven when operating outside the glove box.
- DO NOT set the pressure gauge above 90 psi (0.6 Mpa)!
|
Vacuum Level
 | |
| Sealing Blade Dimension | 340mm x 6mm |
| Heating Timer | 0 - 99 seconds Adjustable |
| Sealing Temperature | 50 - 250°C adjustable with control accuracy of +/-2°C |
Suggested Air Pressure
| - The vacuum chamber lid and sealing die are driven by compressed air
- Input air pressure: 90 psi (0.6 Mpa). System working air pressure: 80 psi (0.55 Mpa)
- Air compressors and fittings are not included. please click here to order or order from your local hardware store
|
| Sealing Pressure Force | 0~100 psi adjustable
Attention: If a gas cylinder is used instead of an air compressor(pic2), a two-stage pressure regulator(pic1) must be installed on the gas cylinder to limit the pressure within the required working range for safe operation. Click here to learn the installation of a gas regulator.
 pic1  pic2
|
| Product Dimensions | 
|
| Shipping Dimensions | 48" x 40" x 35" |
| Shipping Weight | 390 lbs |
| Compliance | - CE Certified
- NRTL or CSA certification is available upon request at the extra cost
- The patent 201220296252.X for the Pouch Cell Sealing Machine MSK-115A-L since January 2013.
|
| Warranty | - One year limited warranty with lifetime support
- Rusting and damage due to improper storage condition or maintenance are not covered by warranty.
|
| Operation Video |  |
| Application Notes | - MTI Supplies ready-to-use Cathode & Anode Electrodes, Separator Film, and Laminated Aluminum Pouch for your research. Please click the picture in below for product details.
- MTI Supplies Nylon-made Splittable Pouch Cell Casing for Battery R&D, please click the picture below for more details.
  
- This is heavy equipment. Must use a Forklift to move in or out from glovebox!
|
