Pouch Cell Sealing & Formation

3-In-1 Edge Ironing, Trimming and Folding Machine for Extra Large Pouch Battery Casing - MSK-119-X

3-In-1 Edge Ironing, Trimming and Folding Machine for Extra Large Pouch Battery Casing - MSK-119-X

기본 정보
Product Name 3-In-1 Edge Ironing, Trimming and Folding Machine for Extra Large Pouch Battery Casing - MSK-119-X
Sale Price Call for Price
Product Code MSK-119-X
Quantity 수량증가수량감소
상품 옵션
 
MSK-119-X is a three-in-one machine provides the continuous workflow for edge trimming, folding and ironing of extra large pouch cell cases without dedicated labor. This process is widely used in the final steps of pouch cell battery pilot-scale production line to ensure a smooth, neat and tidy casing edge. 
 
SPECIFICATIONS:
Features/ModulesIroning Module

Trimming Module

Folding Module

Max. Power Consumption2.5KW
Working Voltage208-240 VAC, single phase
Compress Air Pressure Requirement 
  • 0.7 - 0.8 MPa (Each stroke will consume 0.09L air ) 
  • Note:Air Compressor is not includedplease click here to order or order from your local hardware store
  • Attention: If a gas cylinder is used instead of air compressor(pic2), a two-stage pressure regulator(pic1) must be installed on the gas cylinder to limit the pressure within the required working range for safe operation. Click here to learn the installation of a gas regulator.
          pic1               pic2
Size Info (Edge Ironing, Trimming & Folding Width/Length)
  • Cell length: 20~580mm
  • Cell width: 20~240mm
  • Cell thickness: 3~12mm
Temperature InfoIroning Temperature: 0-250℃ adjustable
Dwell Time0-99 seconds adjustable
Productivity160~220 pcs / hr (Expected lifespan of Trimming blade ~ 1 million times)
Trimming accuracy+/-0.1mm
Working Modes
  • Continuous workflow for edge trimming, folding and ironing of extra large pouch cell cases (manual cases loading is needed)
  • Linear sliding rail for easy manipulation of trimming, folding and ironing modules.
                                 
                Battery Holding Fixture          Sliding Rail           Operation Interface
How to use this ToolWhen the pouch cell is fabricated, an uneven edging excess is expected. In order to make a neat and tidy cell with a smooth edge just like the commercial pouch batteries, please follow the steps in below:
Step 1. The trimming module will cut off the excess area of the casing edge, only leave the size appropriate for the edge folding and ironing
Step 2. The ironing module will smooth the edge prior to the folding
Step 3. The folding module will partially fold the edge
Step 4. The ironing module will smooth the folded section again and then iron the longer section against the sides of the case. Now a neat and tidy cell is finished.
      
Product DimensionsL1950X W850 X H1800 mm
Shipping Weight & Dimensions
  • 1700 lbs
  • 81" x 40" x 81"
WarrantyOne Year limited warranty with lifetime support (Rusting and damage due to improper storage condition or maintenance are not covered by warranty)
Operation Manual & Video
           
Net Weight350Kg