Pneumatic Press
 
|
• Max. Load: 4KN ( 400 kg )- • Max. Pressure is depended on sample area
( Load Force / Area = P) - • Pneumatic cylinder travel distance 95 mm Max.
- • Working area: 160 mm W x 160 mm D
|
| Power Requirement | - • AC220V ±10%, 50Hz/60Hz
- • 1500W
|
Driven Gas
 |
• Driven by any standard air compressor, which is not included.
Please click the picture on the left to order.- • 0.7MPa
- • Attention: If a gas cylinder is used instead of air
compressor(pic2), a two-stage pressure regulator(pic1) must
be installed on the gas cylinder to limit the pressure within the
required working range for safe operation.
Click here to learn the installation of a gas regulator.
 pic1  pic2
|
Heating Platens |
• Two heating platens with independent PID temperature control
up to 150°C ± 5℃- • Working area: 160 mm W x 160 mm L
- • Platen is made of Die Steel with HRC60°±2°
- • Parallelism of top & bottom platens <15um
|
Pressure
|
• Digital pressure display with timing control- • Frontal manual adjustable valve for pressure tuning,
0.2~0.7MPa (1KN~4KN) - • Pressure Accuracy: +/- 0.5 kg
|
Product Dimensions
|
• Hot Press: L450mm*W250mm*H580mm- • Control Console: L220mm*W430mm*H340mm
|
Compliance |
• CE approval- • NRTL certification is available upon request at extra cost.
Please contact our sales representatives for a quote.
|
| Warranty | One-year limited warranty with lifetime support (rusted and damaged parts due to improper storage condition or maintenance are not covered by warranty) |
Application Notes |
• It can be used as a jig for compressing pressure adjustable split
test cell, please click the pictures in below for details:
  
- • MTI Supplies ready-to-use Cathode & Anode Electrodes,
Separator Film and Laminated Aluminum Pouch for your
research. Please click the picture in below for product details. - • MTI Supplies Nylon made Splittable Pouch Cell Casing for
Battery R&D, please click the picture in below for more details.
   
|
Optional |
• If the sample is small, and the budget is limited, you may consider
laminating hot press below for hot pressing formation
|
Operation Manual & Video
|
 
|
| Net Weight | 115 kg |
| Shipping Weight | 150 kg (330 lbs) |
