| Model Number | EQ-Die-15D-B |
| Pressure Force | 16 ton max. |
| Material | Rc 60 - 62 hardened steel
Ra 0.08μm highly polished steel
All pressing dies are made by high-stretched carbon steel to achieve high hardness to meet the essential requirements of making ceramic or metal samples. Otherwise, the pressing surface could probably get scratched. |
Dimensions
 | A: Support Plate Thickness: 10mm
B. Sleeve O.D. : ⌀44mm
C. Die Sleeve Height: ⌀46mm
D. Sleeve I.D. : ⌀14.85mm + 0.03-0.05mm
E. Top Pressing Rod Body Length: 28mm | F. Top Pressing Rod Head Thickness: 5mm
G. Pressing Rod Diameter: ⌀14.85mm ± 0.1mm
H. Bottom Pressing Rod Body Length: 23mm
I. Bottom Pressing Rod Head Thickness: 7.8mm
|
|
| Weight | 1.3 lbs. |
Material Requirement
 |
• 32-75 Microns- • Do not use this die set for pressing powder with a particle size of 30 micron or smaller; Small particles
may slip into the gap of the die parts and damages the sleeve during the compression. - • Ball mill or ground the powder to the size of 32~75 microns powder before pressing. Please consider
using the 3'' Dia. Sieve Set No.200&450 Mesh to separate the 32~75 microns particles from the powder
clumps. - • For pressing sticky metal powders such as Al, Mg, Zn, it is necessary to use dry or alcohol-based tool
lubricant to lubricate the die and sleeve set to reduce friction during the compression.
|
Package Content
|
• One pressing die sleeve- • One top pressing die
- • One bottom pressing die
- • One support plate
- • One die kit container
|
Safety Precaution
 |
• To avoid the risk of accidents and damage to the Pressing Die, please read these instructions carefully
before installation and before using it for the first time.- • Read the manual, especially the die installation schematic, before the operation.
- • Do not press flammable, explosive materials.
- • The operator must wear protection goggle.
- • You must have a hydraulic pellet press equipped with the a Protection Cover, please click the pcitures to
the left to order. - • To avoid damaging the die core and sleeve, we strongly recommend to press powder with a professional
laboratory hydraulic press to ensure the evenest pressing interface and uniform pressure force.
|
Pressing Die Installation Schematic / Instruction
 | 
 |  | - 1. Mixing and grinding chemical powder by agate mortar or
Ball Mill - 2. Calcine mixed the powder in a high temp furnace under
suitable temperature - 3. Crushing and Grinding calcined powder again by mortar
or ball mill - 4. Put calcined powder into the die
- 5. Pressing sample by a pressing machine under suitable
pressure - 6. Take out pellet sample from die
- 7. Sintering the pellet under suitable temperature
|
|
Application Notes
|
• Use ethanol to clean the pressing die before and after use every time- • Use anti-rust oil after the operation and store the kit inside the original box in a dry place to avoid rusting.
- • You may consider using EQ-BNMR for easy mold release. Please click the picture below to order.
-
|
