Configuration
| • Stainless Steel Chamber - Suitable for Controlled Inert Gas or Vacuum Condition- • Sintering Press Unit
- • Sintering DC Pulse Generator
- • Vacuum Unit
- • Sintering Control Unit
|
Power | 20 KVA |
Input Voltage | AC220V 50/60 Hz Three Phases |
Output Current | DC 0 - 1500 A (Digital Controlled) |
Output Voltage | DC 0 - 10 V (Digital Control) |
Pulse Frequency | • 5 - 255 ms Adjustable- • 2 - 1000 Hz adjustable
|
Working Temperature | • 200ºC - 1200ºC with K-type thermal couple - • 200ºC - 1600ºC with B-type thermal couple
- • Two types of thermal couple are included
|
Temperature controller
| • Precision Eurotherm temperature controller is built in- • Overshoting temperature is less than 5ºC at the feast heating rate
- • Temperature accuracy : < 0.1ºC
|
Hydraulic Presss
| • Manual operated hydraulic press to apply pressure.- • Max pressure: 20 T
- • Digital Pressure guage is built in with over-pressure alarm.
|
Sintering Die Set Dimension
| • OD. 85- 100 mm diameter made of HIP graphite in Japan- • ID: 20 mm - 50 mm
- • Sintered Sample size : 20 - 50 mm depended on sintering temperature.
- • Made of high purity graphite by HIP processing, Max. Pressure for the die is 50 MPa, and Max.
Load from the hydraulic press is dependent on die 's ID - º 0.5"ID Max. 0.5T
- º 1.0 ID: Max. 3T
|
Sintering Stroke | 100 mm |
Vacuum Chamber | • Vertical vacuum Chamber- • Inner Double Layers Stainless Steel Reflectors
- • Rotary Pump included
|
Max Vacuum Level (Room Temperature) | • 10 Pa (7.5 x 10^-2 torr) with the mechanical pump- • One double stage mechanical pump is included
- • 1 Pa ( 10x10-4 torr ) with optional turbo pump ( click picture below right to order )
-
|
Pressure Control System | PLC |
Pressure Stability | ≤±0.1MPa |
Pressure Rising Rate | ≤2Pa/hr |
Max Heating Rate | • 300ºC/Minute working temperature betweem 1200 - 1600 ºC- • Note: 50ºC/minute when working at low temperature range 200 - 800ºC
|
Safety Devices | Emergency Stop System and Warning Alarm System |
Water Cooling | 58L/minute recirculating water chiller is included fro cooling pushing head
|
Standard Accessories | • SPS Sintering Graphite Die Set- • Graphite Spacer
- • K & B typeThermal Couples
- • O-rings
- • Clamping Tool
|
Dimension | • Power Supply :760 L X 460 W X 1820 H, mm - • Furnace: 970 L X 720 W X 1400 H, mm
|
Compliance | |
Warranty: | • One year limited warranty- • Free training in MTI location is provided before shipping
|
Operational Instruction | - • The demo video will be available soon
|