Features
|
• Color touchscreen control- • Pre-loading one batch electrodes, one roll of separator, and one roll of tape, then touch button
to go - • Automatic finish cut and tape upon the completion of the configured number of rotations
- • 10 pcs per minute speed for each batch up to 200 cells.
- • Optional for 18650, 21700 or 26650 cell
|
Input Power |
- • Single phase 208 - 240 VAC, 50 / 60 Hz
- • 2 000 W power
|
Compressed Air
|
• Compressed air of 0.7 MPa is needed for the operation of this machine- • Please note the air compressor is not included. Please click the picture below to order one at
MTI, or order it from your local hardware store - • Attention: If a gas cylinder is used instead of air compressor(pic2), a two-stage pressure
regulator(pic1) must be installed on the gas cylinder to limit the pressure within the
required working range for safe operation. Click here to learn the installation of a gas
regulator.
 pic1 pic2
|
Cathode / Anode Feeding
|
• Pre-loading one batch of electrodes ( 100 trip max.), one roll of separator, and one roll of tape,- • Vaccum holder will absorb the electrode strip in one by one to feed into assembling line
- • Width range: 25 – 70 mm (adjustable on feeder bed)
- • Thickness range: 100 – 300 μm
|
Separator Feeding |
• Loading material: separator film rolls, such as polyethylene (PE) or polypropylene (PP)- • Length range: separator roll with a diameter < 250 mm
- • Width range: 25 – 70 mm
- • Thickness range: < 100 μm
- • Tension range: 0 – 4 N for both top and bottom separator films
|
Winding
|
• Winding needle size: 3.5 mm OD- • Electrode winding size: 14 – 32 mm OD, 25 – 70 mm in length
- • To wind an electrode core with a certain OD, a spreadsheet for calculating needed number of
turns and electrode sheet length can be downloaded here - • Winding speed: 0 – 400 rpm adjustable
- • Winding precision: < 0.5 mm edge roughness
|
Tape Loading
|
• One roll of tape pre-load on the machine for strapping finished electrode core with the tapes- • Roll diameter: 150 mm Max.
- • When winding finished, the tape will be applied to the winded core and cut.
|
| Size | - • 1600 mm L x 1300 mm W x 600 mm H
|
| Net Weight | |
Warranty |
• One-year limited warranty on lifetime support- • Rusting or damage due to improper storage conditions or maintenance is not covered by
warranty
|
Compliance |
• CE Certified- • MET Certification is available upon request at extra cost
|
Operation Instruction & Video |
 
|
Optional | |
