Power |
• Furnace input 50VAC, 500W max. 50/60 HZ- • Need a transformer ( 110/220V - 50V ) to run a single furnace under either 110V or 220VAC
- • May connect two furnace in series to run at 110VAC
|
Working Temperature
|
• Max. Temperature: 1000 °C (< 1 hr)- • Continuous working temperature: 900 °C
- • Max. Heating Rate: 10°C /min
|
Heating Zone | |
Temperature Controller
|
• PID automatic control and auto-tune function.- • 30 programmable segments for precise thermal processing.
- • Built-in protection for the over-heated and broken thermocouple.
- • Temperature Accuracy: +/- 1 °C.
- • K type thermocouple.
|
Heating Elements | - • Fe-Cr-Al Alloy doped by Mo
|
Processing Tube | |
Vacuum Flange
|
• One end is KF25 quick clamp flange is inluded， without valve- • Another end is screw tighten flange with 1/4 gas inlet
- • You may click link below to order the valve and fitting and DIY for connection
   
|
Vacuum Pressure
|
• 20 m torr can be achieved by the mechanical pump- • Please click the picture below to order vacuum pump
|
Dimensions
|
|
Shipping Weight | 50 lbs |
Warranty
|
One year limited warranty with lifetime support (Consumable parts such as processing tubes, and O-rings are not covered by the warranty, please order replacements at related products below.)
|
Compliance |
• CE Certified- • NRTL(UL61010) or CSA certification is available at extra cost.
please click marks below to learn details
    
|
Operation Instructions |
|
Application Note |
• The furnace is separable with controller and easy to replace- • The furnace can be used as vertical position as the picture below
- • The furnace is small enough to put into glovebox through airlock chamber
-
   
|
Optional Protective Cover
|
• A special made protective shield can be mounted on the furnace for scald protection at
an extra cost.- • If the furnace will be used for a long period of time at high temperature (800°C+), it is
recommended to install the protective shield to avoid scalding accidents. - • Please contact us for more details.
-
 
|
