Furnace Structure
| • Double layer steel casing with air cooling keeps furnace surface temperature lower than 60°C. - • High purity fibrous alumina insulation for maximum energy saving.
- • The special refractory coating on liner and heating element to increase furnace life.
|
Power | 7 KW |
Voltage | AC 208-240 Single Phase, 50/60 Hz |
Max. Temperature | 1200° C (<1hr) |
Continuous Temperature | 1100°C |
Max. Heating Rate | <= 20 oC /min |
Heating Zone Length
| • Heating zone length: 880 mm ( single zone )- • Constant temperature area: 240mm
|
Constant Temperature Zone | 240 mm (+/-1° C) |
Heating Elements | Fe-Cr-Al Alloy doped by Mo |
Thermocouple Type | K Type Thermocouple |
Temperature Controller | • MET certified 30 programmable segments for precise control of heating rate, cooling rate and dwell time.- • Built in PID Auto-Tune function with overheating & broken thermocouple protection.
- • Over temperature protection and alarm allows for operation without attendant(s).
- • +/- 1 ºC temperature accuracy.
- • RS485 Communications Port.
- º Advanced Temperature Control (Optional)
- º MTS02-Y Temperature control software kit (for YD518P series controllers) + 15" laptop
package is available at the options bar. Click for the detail information about the MTS02-Y software kit. - º You may upgrade the temperature controller to the Eurotherm 3504 Temperature
Controller which is fully compatible with LabVIEW. This package includes a Eurotherm 3504 programmer, a communication cable (RS485 - USB) and a software CD. Click the pic below to view the full spec of Eurotherm 3504 temperature controller.
-
|
Tube Size and Materials | • Made of high-quality Fused quartz with size of 130 mm O.D x 120 mm ID x 1400 mm L- • Optional tube diameter:s 80mm, 100mm
- • Two fibrous ceramic tube blocks are included for blocking heat radiation from inside tube.
(Ceramic blocks must be fully inserted into the furnace chamber before heating) - • Quartz blocks (optional) are ideal for cleaner processing environment and higher vacuum efficiency.
- • You may order flange support to avoid tube rotating ( click Pic below right )
|
Vacuum Sealing | • One pair of SS 304 vacuum flange with double high-temperature silicone O-ring is Included/- • Two needle valves with 1/4" pipe adapter are installed on flanges.
- • One vacuum/ pressure gauge is installed one side flange
- • Vacuum level can reach 10^-2 torr by quality mechanical vacuum pump and 10^-5 torr by molecular
pump • Optional:- º You may choose flange with KF25 vacuum port for faster and better vacuum , also, please
choose quality mechanical pump or digital molecular pump ( click picture below to order at extra cost )
|
Sliding Flange
(Optional at Extra Cost) | • One sliding flange for transporting samples (manually operated) is available as an option at $1995 extra cost.
- • Referring to picture above, you may need to order two mobile carts to support the sliding device
( click on underlined to order)
|
Dimensions | 1100 X 450 x 670mm |
Net Weight | 80 Kg |
Shipping Weight | 410 lbs |
Shipping Package Size | 60x40x43 inch |
Warranty | One year limited manufacturer warranty with lifetime support (Consumable parts such as furnace liner, processing tubes, and O-rings are not covered by the warranty, please order replacements at related products below.) |
Laptop, software & WiFi Control(Optional)
| |
Compliance | • CE Certified- • UL / MET / CSA Certification is available upon request, additional charges will apply
- • Temperature controller is MET and CE Certified
|
Application Notes Click here to learn the installation of a gas regulator
| • Tube furnaces with quartz tubes are designed for using under vacuum and low pressure < 0.2 bars / 3 psi / 0.02 Mpa- • Attention: A two-stage pressure regulator must be installed on the gas cylinder to limit the
pressure to below 3 PSI for safe operation. Click here to learn the installation of a gas regulator.
- • Vacuum limit definition for all quartz tube furnaces: * Vacuum pressures may only be safely used
up to 1000°C - • Click here to learn How to set up quartz/ ceramic tube and vacuum flange for MTI Tube furnace.
( also, click picture below to see demo video ) - • Please click here to see our typical temperature profile calibration result at various temperatures.
- • In order obtain accurate temperature inside tube furnace, please click here to learn how to
calibrate the temperature on your own.
|
Operation Instructions
|
|