Power

 2.5KW

 Voltage

 AC 208-240V Single Phase, 50/60 Hz

 Max. Temperature

 1200^oC

 Continuous Temperature

 1100^oC

 Max. Heating Rate

 <= 20^oC /min

 Tube Size and Materials

 OD:130mm; ID: 120mm; Length: 1400mm (Quartz tube was included in the standard package)

 Heating Zone length

 880mm (single zone)

 Temperature controller

• 
       •  MET certified 30 programmable segments for precise control of heating rate, cooling rate and
           dwell time.
•      •  Built in PID Auto-Tune function with overheating & broken thermocouple broken protection.
•      •  Over temperature protection and alarm allows for operation without attendant(s).
•      •  +/- 1 ºC temperature accuracy.
•      •  RS485 Communications Port.

• 
       •  Two stainless steel flanges with vacuum gauge and valves included
•      •  A hook ring is welded inside of the top flange for hanging sample or crucible by wire

                 

• 
       •  Standard 1/4‘’ Barbed fittings with needle valves.
•      •  For supplying high-pressure gas, you may replace the standard barbed hose fitting with
          the 304SS 1/4" Swagelok® Tube Fitting, please click underlined to order.
•      •  Optional: In order to increase the throughput and achieve high vacuum, you may replace the
          standard barbed hose fitting with the KF25 adapter, please click the underlined to order.
•      •  Optional: You may also consider using the parts in below to increase the vacuum efficiency
• Please click here to order digital vacuum gauge for precision vacuum control up to 10^-4 torr (see picture below and click to enlarge)
• You may click here to order flow-meter and install in tube flange (see picture below)
• KF25 Stainless steel Bellows 
• KF25 Quick Clamps

                          

 Vacuum Level

 0.1torr (depends on the vacuum pump)

 Heating Element

 Fe-Cr-Al Alloy doped by Mo

\ Dimension

1200mm (H) x 600mm (W) x 600mm (W) installed with mobile cart

 Net Weight

 about 80Kg (excluding mobile cart)

 Shipping Package Size After   Crating

 65x41x85 inches

 Shipping weight

800lbs  

 Warranty

Laptop, software & WiFi Control (Optional)

Compliance

 Application Notes

Click here to learn the installation of a gas regulator

• 
       •  In order to obtain accurate temperature inside tube furnace, you shall calibrate temperature before use,
          please click here to learn how.
•      •  How to set up a ceramic tube and vacuum flange for MTI Tube furnace.
•      •  Warning: The tube furnaces with quartz tube are designed for using under vacuum and low
          pressure < 0.2 bar / 3 psi / 0.02 MPa
  
•      •  The  flow rate for gases should be limited to<200 SCCM (or 200ml/min) for reducing thermal
           shocks to the tube
•      •  Attention: A two-stage pressure regulator must be installed on gas cylinder to limit the
          pressure to below 3 PSI for safe operation. 
          Click here to learn the installation of a gas regulator.
•      •  Vacuum limit definition for all quartz tube furnaces: * Vacuum pressures may only be safely
          used up to 1000°C
  
  

 Operation Instructions