Furnace Structure | • Double layer steel casing with air cooling to keep case temperature > 55oC- • High quality fibrous insulation ( Made by Japan Company ) for Max. energy saving
|
Power | 7KW |
Voltage | AC 208-240V Single Phase, 50/60 Hz |
Max. Temperature | 1200oC |
Continuous Temperature | 1100oC |
Max. Heating Rate | <= 20oC /min |
Tube Size and Materials | OD:130mm; ID: 120mm; Length: 1400mm (Quartz tube was included in the standard package) |
Heating Zone Length
| • Three Heating Zones:each zone length is 300 mm- • Total Heatong zone length : 900mm
- • Constant Heating Zone: 600 mm if set 3 zone at same temperature )
|
| |
Temperature Controller | MET certified 30 programmable segments for precise control of heating rate, cooling rate and dwell time.- Built in PID Auto-Tune function with overheating & broken thermocouple broken protection.
- Over temperature protection and alarm allows for operation without attendant(s).
- +/- 1 ºC temperature accuracy.
- RS485 Communications Port.
|
Vacuum Sealing | Two stainless steel flanges with vacuum gauge and valves included- A hook ring is welded inside of the top flange for hanging sample or crucible by wire
|
Fitting Ports
| • Standard 1/4‘’ Barbed fittings with needle valves.- • For supplying high-pressure gas, you may replace the standard barbed hose fitting with
the 304SS 1/4" Swagelok® Tube Fitting, please click underlined to order. - • Optional: In order to increase the throughput and achieve high vacuum, you may replace the
standard barbed hose fitting with the KF25 adapter, please click the underlined to order. - • Optional: You may also consider using the parts in below to increase the vaccum effeciency
|
Vacuum Level | 0.1torr (depends on the vacuum pump) |
Heating Elements | Fe-Cr-Al Alloy doped by Mo |
Dimensions | 2130mm (H) x 1505mm (W) x 800mm (L) install with mobile cart
|
Net Weight | about 80Kg (excluding mobile cart) |
Shipping Package Size After Crating | 65x45x50 inches |
Shipping weight | 450 lbs |
Warranty
| One year limited warranty (Consumable parts such as heating elements, processing tubes and o-rings are not covered by the warranty, please order the replacement at related products below.)
|
Laptop, software & WiFi Control (Optional)
| |
Compliance
| • CE Certified- • UL / MET / CSA Certification is available upon request, additional charges will apply
- • Temperature controller is MET and CE Certified
- • Transformer is UL Certified
|
Warning
Click here to learn the installation of a gas regulator
| - • Warning: The tube furnaces with quartz tube are designed for using under vacuum and low
pressure < 0.2 bars / 3 psi / 0.02 MPa - • The flow rate for gasses should be limited to<200 SCCM (or 200ml/min) for reducing thermal
shocks to the tube - • Attention: A two stage pressure regulator must be installed on the gas cylinder to limit
the pressure to below 3 PSI for safe operation. Click here to learn the installation of a gas regulator. - • Vacuum limit definition for all quartz tube furnaces: * Vacuum pressures may only be safely
used up to 1000°C
|
Operation Instructions
| |