Furnace Casing | Double layer steel structure with air cooling to keep case temperature > 65oC |
Power | 6KW |
Voltage | AC 208-240V Single Phase, 50/60 Hz |
Max. Temperature | 1200oC < 1 hrs |
Continuous Temperature | 1100oC < continuous |
Max. Heating Rate | <= 20oC /min |
Tube Size and Materials
| • OD:100mm ; ID:94mm ; Length: 1400mm • (Quartz tube was included in the standard package) • 1, 2" 3", 80mm and 5" tube optional at the same cost
|
Heating Zone length
|
• 200mm for each single zone • 5 x 200mm = 1000 mm in total
|
Equal temperature zone | • 650mm (+/-1oC) if set 5 zone in same temperature |
Temperature Controllers
| • MET certified 30 programmable segments for precise control of heating rate, cooling rate and dwell time. • Built in PID Auto-Tune function with overheating & broken thermocouple broken protection. • Over temperature protection and alarm allows for operation without attendant(s). • +/- 1 ºC temperature accuracy. • Five K-type thermocouples (one for each zone). • RS485 Communications Port.
|
Laptop, software & WiFi Control(Optional)
| • Brand new laptop with Microsoft Window 10 and Microsoft Office 2013 (30 days free trial) for immediate use. • Labview Based Temperature Control System (EQ-MTS01) enables user to edit temperature profile, manage heat-treatment recipe, record and plot data for MTI furnaces. • A wireless remote control provides up to 300 meters operating range. • Above features are available upon request at an extra cost (up to $1,000). Please contact us for more information. • Note: The software is only compatible with MTI’s Yudian Temperature Controller
|
Vacuum Seal | • Two stainless steel flanges with vacuum gauge and valves included • A hook ring is welded inside of the top flange for hanging sample or crucible by wire
|
Fitting Ports
| • Standard 1/4‘’ Barbed fittings with needle valves. • For supplying high-pressure gas, you may replace the standard barbed hose fitting with the 304SS 1/4" Swagelok® Tube Fitting, please click underlined to order. • Optional: In order to increase the throughput and achieve high vacuum, you may replace the standard barbed hose fitting with the KF25 adapter, please click the underlined to order. • Optional: You may also consider using the parts in below to increase the vacuum efficiency º Please click here to order digital vacuum gauge for precision vacuum control up to 10-4 torr (see picture below and click to enlarge) º You may click here to order flow-meter and install in tube flange (see picture below) º KF25 Stainless steel Bellows º KF25 Quick Clamps
|
Vacuum Level | 0.1torr (depends on the vacuum pump) |
Heating Element | Fe-Cr-Al Alloy doped by Mo |
Dimension
| 1100mm x 450mm x 670mm ( exclude mobile cart ) 1200mm (H) x 600mm (W) x 600mm (W) install with mobile cart
|
Net Weight | about 180Kg (excluding mobile cart) |
Shipping Package Size after Crating | 65"x40"x80"
|
Shipping weight | 675 lbs |
Warranty | • One year limited warranty (Consumable parts such as heating elements, processing tubes and o-rings are not covered by the warranty, please order the replacement at related products below.)
|
Compliance
| • CE Certified • All electric components ( >24V) are UL / MET / CSA certified • The furnace is ready to pass TUV(UL61010) or CSA certification at extra cost. ( please click marks below to learn details )
|
Application Notes
Click here to learn the installation of a gas regulator
| • In order to obtain accurate temperature inside tube furnace, you shall calibrate temperature before use, please click here to learn how. • How to set up a ceramic tube and vacuum flange for MTI Tube furnace. • Warning: The tube furnaces with quartz tube are designed for using under vacuum and low pressure <0.2 bars / 3 psi / 0.02 MPa • The flow rate for gasses should be limited to<200 SCCM (or 200ml/min) for reducing thermal shocks to the tube • Attention: A two-stage pressure regulator must be installed on the gas cylinder to limit the pressure to below 3 PSI for safe operation. Click here to learn the installation of a gas regulator. • Vacuum limit definition for all quartz tube furnaces: * Vacuum pressures may only be safely used up to 1000°C
|
Operation Instructions
|
|