Furnace structure
| • Double layer steel case with two cooling fans, which ensure low surface temperature- • High purity fibrous alumina insulation for energy saving
|
Power
| • 9 KW- • Require 60A Air breaker switch
|
Voltage | - • AC 220-240 Single Phase, 50/60 Hz
|
Heating Zone Length
| • Two zones heated separately- º Zone 1: working temperature 800 - 1500ºC (heated by SiC ), length: 12" (300 mm)
- º Zone 2: working temperature 800 - 1500ºC (Heated by MoSi2) heating 12" (300 mm)
- • Constant temperature zone length: 14" within +/-2ºC ( if two zone setting at same temperature )
- • Max. Heating rate: 10ºC/min
|
Mullite Tube Size
| GSL-1500X-II-50 50.8 mm O.D. x 44.5 mm I.D x 1000 mm Length
| GSL-1500X-II-75 76.2 mm O.D. x 70mm I.D x 1000 mm Length | GSL-1500X-II-100 102mm O.D. x 92mm I.D x 1000 mm Length |
Tube and Flange
| • Mullite Tube made in the USA, which has much better thermal shock resistance than Alumina tube.- • Stainless steel vacuum sealing flange with valve and meter is included
- • Thermal block is included . See picture below middle how to place
- • You may order flange support to avoid tube rotating ( click Pic below right )
click here to order spare
|
Fitting Ports
| • In order to increase the throughput and achieve high vacuum, you may replace the standard barbed hose fitting with the KF25 adapter, please click underline to order. • For supplying high-pressure gas, you may replace the standard barbed hose fitting with the VCR Face Seal Fitting, please click underline to order.
|
Temperature Control
| • PID automatic control via SCR (Silicon Controlled Rectifier) power control - • 30 programmable segments for precise control of heating rate, cooling rate and dwell time.
- • Built-in over temperature alarm and protection allows for operation without the attendant.
- • +/- 1 ºC temperature accuracy.
|
Heating Elements
| • Zone one: 8 pcs U type SiC rods (1500C grade )- • Zone two: 8 pcs U MoSi2 rods (1800C grade )
|
Power cable & plug | • 10 feet length 8-3 AWG heavy duty UL approved power cable is included- • Extra length cable can be ordered by click picture below
- • The plug is not included. You can order from your local hardware store according to female plug in
your lab, or order from link below (50A plug)
|
Dimension | 780 L x 450 W x 720 H mm |
Net Weight | 150 kg |
Warranty
| One-year limited warranty (Consumable parts such as processing tubes, o-rings and heating elements are not covered by the warranty, please order the replacement at related products below.)
|
Laptop, software & WiFi Control(Optional)
| • Brand new laptop with Microsoft Window 10 and Microsoft Office 2013 (30 days free trial) for immediate use.
- • Labview Based Temperature Control System (EQ-MTS01) enables user to edit temperature
profile, manage heat-treatment recipe, record and plot data for MTI furnaces.
- • A wireless remote control provides up to 300 meters operating range.
- • Above features are available upon request at an extra cost (up to $1,000). Please contact us
for more information.
- • Note: The software is only compatible with MTI’s Yudian Temperature Controller.
- • Eurotherm precision temperature controller with +/-0.1°C accuracy is available upon request
at the extra cost.
|
Certificate | • CE Certified- • NRTL / CSA Certification is available upon request, additional charges will apply
-
|
Shipping package size | 47" x 45" x 45"(1200L x 1150W x 1150Hmm) |
Shipping weight | 396 Lbs |
Notice | How to set up ceramic tube and vacuum flange for MTI Tube furnace |
Warnings
Click here to learn the installation of a gas regulator.
| • The tube furnaces with alumina tube are designed for using under vacuum and low pressure < 0.2 bar / 3 psi / 0.02 Mpa.
- • Never use graphite crucible in alumina tube.
- • Vacuum pressures may only be safely used up to 1000°C. The flow rate for gases should be limited to
< 200 SCCM (or 200 ml/min) for reducing thermal shocks to the tube.
- • Attention: A two-stage pressure regulator must be installed on the gas cylinder to limit the
pressure to below 3 PSI for safe operation. Click here to learn the installation of a gas regulator.
- • Never heat the furnace while the gas release valve is closed and a positive pressure condition exists
within the furnace chamber. The pressure gauge must be used to closely monitor the chamber condition at all times during the heating process; please open the gas release valve immediately once the chamber pressure has reached over 3 PSI to prevent unforeseeable damages.
|
Operation Instructions | |