Power Input | 6KW |
Working Voltage | AC220V Single phase 50/60Hz ( 40 A breaker required) |
Working Temperature | 1500°C Max. for short time 1400°C Continuously
|
Recommend Heating rate | 5°C/min. |
Processing Tube | • Material: Mullite ceramic made in USA- • Size: 82 O.D x 73 I.D x 1000 mm L
- • Stainless steel vacuum sealing flange with valve and meter is included
- • Thermal block is included . See picture below middle for details
- • You may order flange support to avoid tube rotating (click picture below right)
click here to order spare
|
Heat Zone Length | • Two heating zones: 200 mm/ each (included 20 mm spacing)- • Total zone length: 390 mm
- • Constant Temperature Zone length: 200mm (if set 2 zone at same temperature) +/- 2ºC.
- • Accept processing tube up to 100 mm diameter
|
Temp. Profile at 1400ºC | (click to enlarge)
|
Overall Dimensions | 610 mmL × 470 mmW × 755 mmH |
Temperature Controllers | • PID automatic control with 30 programmable segments for precise control of heating rate, cooling rate and dwell time.- • Built-in overheating & broken thermocouple protection.
- • Over-temperature protection and alarm allows for operation without attendant(s).
- • +/- 1 ºC temperature accuracy.
- • Two S type thermocouples (one for each zone).
- • RS485 Communications Port.
- • Optional:
- º The furnace may be operated by PC by installing a control module.
Please order an MTS-02 control module at extra cost. - º If you order the PC control module together with the furnace, we will install and test
it before shipping. We recommend you to order a computer laptop from us to avoid software installation problems. For more information please click here.
|
Vacuum Level | • 10E-2 torr by a quality mechanical vacuum pump- • 10-5 torr by the molecular pump
|
Heating Elements & Thermal couples | • 16 pcs 1500ºC grade Silicon carbide rod (14 mm Dia. x 150 mm heating x 413 mm length), which is consumable, not covered by warranty. Please click the picture below left to order spare and replacement- • 2 pcs S type thermal couple built-in
-
|
Laptop, software & WiFi Control(Optional) | • Brand new laptop with Microsoft Window 10 and Microsoft Office 2013 (30 days free trial) for immediate use.- • Labview Based Temperature Control System (EQ-MTS01) enables user to edit temperature
profile, manage heat-treatment recipe, record and plot data for MTI furnaces. - • A wireless remote control provides up to 300 meters operating range.
- • Above features are available upon request at an extra cost (up to $1,000). Please contact
us for more information. - • Note: The software is only compatible with MTI’s Yudian Temperature Controller
|
Net Weight | 110 Kg |
Application Notes
Click here to learn more about the installation of a gas regulator. | • The tube furnaces with mullite tube are designed for using under vacuum and low pressure < 0.02 Mpa / 0.2 Bar/ 3 PSI. Vacuum pressures may only be safely used up to 1300°C. The flow rate for gases should be limited to < 200 SCCM ( or 200ml/min) for reducing thermal shock to the tube.
- • Never use graphite crucible in alumina tube.
- • Attention: A two-stage pressure regulator must be installed on the gas cylinder to limit
the pressure to below 3 PSI for safe operation. Click here to learn the installation of a gas regulator.
- • Never heat the furnace while the gas release valve is closed and a positive pressure condition
exists within the furnace chamber. The pressure gauge must be used to closely monitor the chamber condition at all times during the heating process; please open the gas release valve immediately once the chamber pressure has reached over 3 PSI to prevent unforeseeable damages.
|
Warranty | • One year limited warranty with lifetime support (consumable parts such as processing tubes, and O-rings are not covered by the warranty, please order replacements at related products below.).
- • ATTENTION: Any damages caused by the use of corrosive and acidic gases are not
under the coverage of MTI One Year Limited Warranty.
|
Compliance | • CE Certified- • NRTL or CSA certification is available upon request at extra cost.
|
Operation Instructions | |