| Power Input | 9KW |
| Working Voltage | AC220V Single-phase 50/60Hz ( 50 A breaker required) |
| Max. Working Temperature | 1500°C 《 1 hours |
| Continuously Working Temperature | 1400°C
|
| Recommend Heating rate | 5°C/min. |
| Processing Tube | Material: Mullite tube
Size: 82 O.D x 73 I.D x 1200mm L
|
Heat Zone Length |
• Three heating zones: 200 mm / each (Included 20 mm spacing)- • Total heating zone length: 600 mm
- • Constant Temperature Zone length: 350mm (If set 3 zone at same temperature) +/- 2ºC.
- • Accept processing tube up to 100 mm diameter
|
Temp. Profile at 1450ºC
84mm O.D Tube |
(click to enlarge)
|
| Overall Dimensions | 915 mmL × 660 mmW × 762 mmH |
Temperature Controllers
 
|
• PID automatic control with 30 programmable segments for precise control of heating rate,
cooling rate and dwell time.- • Built-in overheating & broken thermocouple protection.
- • Over-temperature protection and alarm allow for operation without attendant(s).
- • +/- 1 ºC temperature accuracy.
- • Three S-type thermocouples (one for each zone).
- • RS485 Communications Port.
- • Optional:
- º The furnace may be operated by PC by installing a control module.
Please order an MTS-02 control module at extra cost. - º If you order the PC control module together with the furnace, we will install and test
it before shipping. We recommend you to order a computer laptop from us to avoid
software installation problems. For more information please click here.
  
|
European Temperature Controllers (optional upgrade)
 |
• 1 heating channel- • 1 program of 8 or 24 segment
- • Alarm Relay: Form 'A' and Form ‘C’ built-in
- • Digital Communications: RS485
- • Temperature Accuracy: ± 0.1ºC
- • Recipes: Using a PC tool recipes can be created that can be used to change the operating
parameters of the 3000 simply by selecting a new recipe via the HMI. This is very useful
where multiple products are processed using the same controller but require different
parameters to be set.
|
Laptop, software & WiFi Control(Optional) |
• Brand new laptop with Microsoft Windows 10 and Microsoft Office 2013 (30 days free trial) - • Labview Based Temperature Control System (EQ-MTS01) enables the user to edit
temperature profiles, manage heat-treatment recipe, record and plot data for MTI furnaces. - • A wireless remote control provides up to 300 meters of operating range.
- • The above features are available upon request at an extra cost (up to $1,000).
- • Note: The software is only compatible with MTI’s Yudian Temperature Controller
 
|
Vacuum Level |
• 10E-2 torr by quality mechanical vacuum pump- • 10-5 torr by molecular pump
|
Thermal Block Placement |
• Two thermal blacks are included. Please click the picture below to learn how to place them
inside tube- • You may order flange support to avoid tube rotating ( click Pic below right )
 .jpg)
|
Heating Elements & Thermal couples |
• 24 pcs 1500ºC grade Silicon carbide rod (14mm Dia. x 150mm heating x 413mm length)- • The heating element is consumable, Please click the picture below to order spare and
replacement. - • 3 pcs S type thermal couple built-in
|
| Net Weight | 160 Kg |
| Shipping Weight & Dimensions | 465 lbs; 52" x 40" x 46" |
Application Notes |
• The tube furnaces with mullite tube are designed for use under vacuum and low pressure < 0.02
Mpa- • Never use graphite crucible and the alumina tube.
- • Attention: A two-stage pressure regulator must be installed on the gas cylinder to limit the
pressure to below 3 PSI for safe operation.
- • The flow rate for gases should be limited to < 200 SCCM ( or 200ml/min )
- • Vacuum pressures may only be safely used up to 1300°C for all mullite tube furnaces:
- • Customized long heating zone up to 1200 mm L with 700 mm uniform temperature zone
( +/- 5°C) ， 安定1800mm mullite tube is available upon request;
( click the picture below to see sketch)
-
 5 zones   6 zones
|
| Operation Instructions |  |
Warranty |
• One year limited warranty with lifetime support (consumable parts such as processing tubes,
and O-rings are not covered by the warranty, please order replacements at related products
below.). - • ATTENTION: Any damages caused by the use of corrosive and acidic gases are not
under the coverage of MTI One Year Limited Warranty.
|
Compliance |
• CE Certified- • NRTL (UL61010) or CSA certification is available upon request at extra cost.
-
     
|
.jpg)
