Power Input | 9.0 K W |
Working Voltage | AC220V Single phase 50/60Hz ( 60 A breaker required) |
Max. Working Temperature | 1600°C ≤1 hours |
Continuously Working Temperature | 1500°C |
Recommend Heating rate | 5°C/min. |
Processing Tube | Alumina Tube Size: 82 O.D x 73 I.D x 1000mm L
click picture to order spare click here to choose a crucible
|
Heat Zone Length | • Three heating zones: 200 mm / each ( included 20 mm spacing )- • Total zone length : 600 mm
- • Constant Temperature Zone length: 350mm ( if set 3 zone at same temperature ) +/- 2ºC.
- • Accept processing tube up to 100 mm diameter
|
Temp. Profile at 1450ºC | (click to enlarge)
|
Overall Dimensions | 860 mmL × 380 mmW × 680 mmH |
Temperature Controller
Temperature controller interface
Optional PC control module
Optional Eurotherm 3204 |
Standard temperature controller:
- • Proportional–integral–derivative control (PID control) and auto-tune function
- • 30 segments programmed with ramping, cooling and dwelling steps
- • Built-in over-temperature alarm and thermocouple failure alarm
- • Three S type thermcouples.
- • +/- 1 ºC temperature control accuracy
- • Default DB9 PC communication port (PC control module and software are sold separately.
See optional.
Optional:
- • MTS-02 PC control module (also including cable and software) is an add-on option for PC
control. - º It is recommended to purchase the module together with the furnace.
We install and test it before shipping. - º It is recommended to purchase the laptop (with software pre-installed) from us to
avoid software confliction. - º Please note the module is not sold solely in the future.
- • Eurotherm 3204 Temperature Controller is optional. This package includes the communication
cable (RS485 - USB) and software CD. Click here to view the full spec.
|
European Temperature Controllers (optional upgrade)
| • 1 heating channel- • 1 programs of 8 or 24 segment
- • Alarm Relay: Form 'A' and Form ‘C’ built-in
- • Digital Communications: RS485
- • Temperature Accuracy: ± 0.1ºC
- • Recipes: Using a PC tool recipes can be created that can be used to change the operating
parameters of the 3000 simply by selecting a new recipe via the HMI. This is very useful where multiple products are processed using the same controller but require different parameters to be set.
|
Laptop, software & WiFi Control(Optional) | |
Thermal Block Placement | • Two thermal blacks are included . Please picture below tolearn how to place them inside tube- • You may order flange support to avoid tube rotating ( click Pic below right )
|
Vacuum Level | • 10E-2 torr by quality mechanical vacuum pump- • 10-5 torr by molecular pump
|
Heating Elements & Thermal couples | • 24 pcs Kanthal 1650ºC grade Silicon carbide rod ( 12 Dia. x 150 heating x 374 lengths,(mm) )- • 3 pcs S type thermal couple built in
- • Please click picture below to order spare heating element
- • Notice: Customer will install SiC rod on site by themselves as instruction manual due to
they are easy to damage during shipping.
-
|
Power Cable & Plug | • 10 feet length 10-3 AWG heavy duty UL approved power cable is included. Extra length cable can be ordered by click picture below-left- • The plug is not included. Browse our catalog for compatible plugs or obtain one from a local
hardware store.
|
Net Weight | 160 Kg |
Operation Instructions | |
Warnings
| • The tube furnaces with alumina tube are designed for using under vacuum and low pressure < 0.02 Mpa / 0.2 Bar/ 3 PSI - • Never use graphite crucible in alumina tube.
- • Attention: A two-stage pressure regulator must be installed on the gas cylinder to limit
the pressure to below 3 PSI for safe operation. Click here to learn the installation of a gas regulator. - • The flow rate for gases should be limited to < 200 SCCM ( or 200ml/min )
- • Vacuum limit definition for all alumina tube furnaces: * Vacuum pressures may only be safely
used up to 1500°C
|
Warranty | • One year limited warranty with lifetime support (consumable parts such as processing tubes, and O-rings are not covered by the warranty, please order replacements at related products below.). - • ATTENTION: Any damages caused by the use of corrosive and acidic gases are not
under the coverage of MTI One Year Limited Warranty.
|
Compliance | • CE Certified- • All electric components ( >24V) are UL / MET / CSA certified
- • The furnace is ready to pass TUV(UL61010) or CSA certification at extra cost.
( please click marks below to learn details )
|