Furnace structure
|
|
Power & Voltage
| |
Max. Temperature | 1100oC (<1 Hour) |
Continuous Working Temperature | 1000oC |
Max. Heating Rate | ≤ 20oC /min |
Heating Zones
| • Four heating zones with independent temperature control
• Each heating zone length 100 mm • Total heating zone length: 400 mm (15.75" in total) - • Max. Constant temperature zone length 250mm, +/- 1°C (if 4 zones are heated to the same temperature)
Note: Max. the achievable temperature difference between adjacent zones is 200°C.
|
Temperature Controllers
| • PID automatic control with 30 programmable segments for precise control of heating rate, cooling rate and dwell time.- • Built-in overheating & broken thermocouple protection.
- • Over temperature protection and alarm allows for operation without attendant(s).
- • +/- 1ºC temperature accuracy.
- • Four K-type thermocouples (one for each zone).
- • RS485 Communications Port.
Optional: The furnace can be operated by PC with MTS02-Y Temperature control software package (includes four communication chips and one 15" laptop). Such package is sold separately at $1300.
|
Laptop, software & WiFi Control(Optional)
| |
Optional Processing Tube & Vacuum flange (Optional)
| The furnace can accommodate <= 1" Dia. x 40" long quartz tube with 1" vacuum flanges and thermal blocks. These accessories are not included in the standard package, please click the pictures in below to order.
|
| |
Product Dimensions
| • Furnace:540mm (L) x 410mm (W) x 330mm (H)- • Control box: 560mm (L)x 380mm (W)x 260mm (H)
|
Net Weight | About 45 Kg |
Warranty | One-year limited warranty (Consumable parts such as processing tubes, o-rings are not covered by the warranty) |
Compliance | • CE Certified- • All electric components ( >24V) are UL / MET / CSA certified
- • The furnace is ready to pass NRTL (UL61010) or CSA certification at extra cost.
(Please click marks below to learn details)
|
Options (click picture to order at extra cost) |
|
Notice | |
Operation Instruction
| Warning:
- • The tube furnaces with quartz/mullite tube are designed for using under vacuum and low pressure <0.2
bars / 3 psi / 0.02 MPa - • Attention: A two-stage pressure regulator must be installed on the gas cylinder to limit the
pressure to below 3 PSI for safe operation. Click here to learn the installation of a gas regulator. - • * Vacuum pressures may only be safely used up to 1000°C
|