Note | OTF-1200X-VII-5 is updated based on OTF-1200X-VII from Jan. 20, 2014
|
Furnace Structure
| • Double layer steel case with air cooling to ensure furnace surface temperature < 60 °C- • Energy saving high purity fibrous alumina insulation.
• Heating Element : 1300ºC grade Fe-Cr-Al Alloy doped by Mo - • 41 "length x 5.5"dia heating chamber with 7 built in thermal couples to accept processing tube from
1" - 5" dia.x2000 mm length - • Splittable cover is lift and closed by a pair of heavy duty compressed air spring to make tube replacement at easy.
|
Power & Voltage | |
| 1200 °C for < 1 hour under flowing gas
|
| 1100 °C under flowing gas 1000 °C under vacuum < 1 torr
|
| <= 10 °C /min |
Quartz tube & Thermal Block Placement
| • Quartz Tube: 130 OD x122 ID x2000 L mm (5"x 79") (The tube is consumable , click picture below to order spare )- • Two fibrous alumina thermal blocks are included , which must be placed on two end of inside tube
( click pic below right )
|
Vacuum Flange
| • One pair stainless steel vacuum flange is included with quick assembling flange ( a outside clamp for quick installation)- º Left flange installed with needle valve with 1/4" pipe port for gas inlet ( Pic below left )
- º Righ flange built in K25 port and Anti-Corrosive digital vacuum gauge to connect a vacuum pump
|
Heating Zone
| |
| • One touch screen digital temperature controller built in a separated unit, which can control seven heating zones independently- • Each channel is PID automatic controlled and saves 10 programs and each program has max. 30 segments
- • Built in overheating & broken thermocouple protection.
- • +/- 1 ºC temperature accuracy.
- • Seven K type thermocouples (one for each zone).
- • RS485 Communications Port built in. and software included,
- • The furnace may be operated by PC ( please order PC separately ).
-
|
Optionals
| • You may add a multi-channel gas delivery system under bottom table for CVD or atmosphere control applications ( click PIC below-left to order )- • You may consider a pressure control unit to keep constant pressure ( click picture below right to order )
|
Dimension (click to see detail )
| |
| • Furnace with Supporting Table: 322 Kg- • Controller: 92 kg
|
Shipping Weight & Dimension
| • Furnace with Supporting Table: 1020 lbs, 88'' x 40" x 64"- • Controller: 290 lbs; 48"x 40'' x 63"
|
| One year limited warranty for electrical parts. (Consumable parts such as processing tubes, o-rings and heating elements are not covered by the warranty, please order the replacement at related products below.)
|
Laptop, software & WiFi Control (Optional)
| |
Compliance | • CE Certified- • All electric components ( >24V) are UL / MET / CSA certified
- • The furnace is ready to pass TUV(UL61010) or CSA certification at extra cost.
( please click marks below to learn details )
|
| |
Notice | |
Warning
Click here to learn the installation of a gas regulator
| • The tube furnaces with quartz/mullite tube are designed for using under vacuum and low pressure < 0.2 bar / 3 psi / 0.02 MPa- • Attention: A two stage pressure regulator must be installed on gas cylinder to limit the pressure to
below 3 PSI for safe operation. Click here to learn the installation of a gas regulator. - • * Vacuum pressures may only be safely used up to 1000°C
- • The flow rate for gases should be limited to<200 SCCM (or 200ml/min) for reducing thermal shocks to the tube
|
Temperature Control Instructions |
|