Power | - 208 – 240VAC, 50/60Hz, Single phase
- 3 KW ( 30A Air breaker required )
|
3 Type of Coating Heads (Optional)
 | Please select the option bars to choose the coating head/method- Reverse Comma Blade ( Transforming ) Pic. 1-3
- Micro-Gravure Coating (Pic. 4)
- Slot Die Coating: for coating thickness from 5μ to 300μ
- 30 - 250 mm coating width is achieved by changing the shim size
- intermittent and grid coatings function are built-in
     
Pic. 1 Pic. 2 Pic. 3 Pic. 4 Pic. 5 Pic. 6 |
Max. Coating Width | 250mm |
Thickness adjustable range | 0 - 5mm
|
Coating thickness (after drying) | 5 - 200um (for most kinds of battery electrode coating material)
Note: The dried coating thickness results vary depending on the physical property of the coating material.
|
Thickness Precision | ± 3µm (± 5µm at edges)
|
Coating Speed | 0-750 mm / minute |
Max. Drying Temperature
| 120°C
( Using a 240V transformer, can reach 150°C max.) |
Temperature Accuracy | ±1°C |
Heating Zone Length | 710mm (28") |
Reeling/Unreeling Shaft
| - 75mm (ID)
- The alignment control is built-in with +/- 0.5 mm via an optical sensor.
- The tension control: 20 - 80N adjustable
|
Max. Reeling/Unreeling Diameter | 250mm (OD)
|
Max. Coating Length
| - Depending on the coating and substrate thickness.
- Typically, 10um thick foil with 100um coating can get 600 meters of electrode length coated per run
|
Slurry Stirring
| SS316 Moving Rod
|
Exhaust Port Size | 127mm O.D |
Control Panel | - Touch screen control panel, which controls the slurry feeding rate, coating speed, and heating temperature.
|
Acessories included | |
Compressed Air | 0.5-0.8 MPa Air compressor is required, but not included. Please click here to order)
Attention: If a gas cylinder is used instead of air compressor(pic2), a two-stage pressure regulator(pic1) must be installed on the gas cylinder to limit the pressure within the required working range for safe operation. Click here to learn the installation of a gas regulator.
 pic1  pic2
|
Slurry Feeding Pumps
| - The Precision Screw Slurry Feeding Pump with mechanical stirring for the roll-to-roll continuous and intermittent coating (not inlcuded in package).
- For slot-die only.
- If customer only work with continuous coating, please consider the syringe pump of MSK-151-L500 with low cost.
|
Optional
| - You may order Dual-Filtration System for NMP Vapor and connect it to the coating system for keeping environmentally healthy. Please click Pic.1 for details.
- Atmosphere plasma cleaning add-on for the substrate is available upon request. Such a surface treatment will activate and increase the energy of the substrate surface and thus enables a better adhesion & bonding to the coating materials. Please click Pic.2~4 and Video.1 for more details.
 Pic.1  Pic.2  Pic.3  Pic. 4  Video.1 |
Product Dimensions |  1620mm ( L) x 950mm (W) x 1100mm (H)
|
Compliance
| - CE Certified
- NRTL (UL61010) or CSA certification is available upon request at extra cost.
|
Warranty | - One-Year limited warranty with lifetime support
- Rusting and damage due to improper storage condition or maintenance are not covered by warranty
|
| Operation Video |    
Reverse Comma Coating Slot Died CoaSting How to make Pouch Cell Howto Make Cylinder cell |
| Net Weight | 1000 kg (2200 lbs) |
| Shipping Weight & Dimension | Pallet#1: 1954 lbs 75" x 46" x 55"
Pallet#2: 174 lbs 40" x 32" 19" |
