Feature
| - The maximum working temperature is up to 200ºC
- Two individual heating chambers and controlled by two temperature controllers independently
- Each heating chamber size: 16x14x15", 53L, a total of 106L for two chambers
- Two chambers can be vacuumed by one mechanical vacuum pump
- One mechanical vacuum pump with the exhaust filter is included in the standard package
|
Power | - Single Phase AC 110 -120VAC ( two power outlets are required)
- 50/60 Hz
- 2800 W
|
Heating Temperature | - Room Temperature : RT+ 10 ~ 200°C
- Maximum temperature 200°C
- +/- 1ºC accuracy
|
Chamber | - Two Individual Chambers
- Inner Chamber size: 415 x 345 x 373 mm (16 x14x15) (W x H x D); 53 Liter/each chamber
- The chamber is made of the stainless steel 1Cr~18Ni9Ti and welded with bracing pieces
- The mechanical vacuum gauge is included
- The silicone door gasket and positive latch door ensure the good sealing
|
Mobile cart
| |
Vacuum Level | |
Temperature Controller | - +/-1°C accuracy and +/-5 °C uniformity under 100°C; 25" Hg
- built-in over-temperature protection to make operation safe
|
Vacuum Pump
| - The vacuum pump is included - EQ-FYP-Pump
- 240 L/min)
- 750W
- One exhaust filter is included
- SS bellows with KF 25 port is included to connect two chambers to one pump
|
Dimensions | - 740 mm (L) x 810 mm (W) x 1470 mm (H)
|
Net Weight | |
Shipping Weights & Dimensions | |
Shipping Weight | |
Compliance | - CE Certified
- NRTL certification is not available
|
Warranty | - One-year limited warranty and lifetime support
- The consumable sealing O-ring is not included in the warranty
|
Operation Instruction | |
Application Kits
| - For accurate temperature measurement, you may do calibration by using the temperature calibrating kit.
- For more information on how to calibrate the oven temperature, please review How to calibrate the oven.
- After heating the oven to a high temperature, the chamber will be dulled and discolored.
- They are normal phenomena and will not affect the performance of the oven.
- All samples inside the chamber should not have any contact with the chamber wall.
|