Pneumatic Press
| - Max. Load: 1.6T ( 1600 Kg or 150KN)
- Pneumatic cylinder travel distance 200 mm Max.
- Working area: optional 300 x 300 mm ( 12"x12") or 500 x 500 mm ( 20"x20")
- Max. working height: 0 - 110 mm
- Driven by any standard air compressor or inert gas tank, which is not included. 0.2~0.8Mpa of air pressure supply is needed. Please click the picture below to order.
- Attention: If a gas cylinder is used instead of an air compressor(pic2), a two-stage pressure regulator(pic1) must be installed on the gas cylinder to limit the pressure within the required working range for safe operation. Click here to learn about the installation of a gas regulator..
-
 pic1  pic2
|
| Heating Plates | - Two heating plates with two independent single-point temperature controllers
- Single point PID temperature control with +/- 1ºC accuracy
- Heated plate area: optional 300 x 300 mm ( 12"x12") or 500 x 500 mm ( 20"x20")
- Max. working temperature: 200°C (continuous)
- Heating Rate: <3°C/ minute
- Power: 220V (50/60 Hz), 3000 W, single phase
|
Pressure Controller
| - Pneumatic cylinder bore size 125mm diameter.
- Digital pressure controller with PID tuning, which can keep the constant pressure at setting value.
- 30 segments programmable. (max working time: 9999 minutes for each segment)
- Pressure Accuracy: +/- 0.5 kg
- Optional: You may order the load cell below to calibrate the applied pressure force from time to time
|
Product Dimensions
|  |
Compliance
| - CE approval
- NRTL or CSA certification is available upon request at an extra cost
|
| Warranty | One-year limited warranty with lifetime support (rusted and damaged parts due to improper storage condition or maintenance are not covered by warranty) |
Operation Demo Video
|  |
| Net Weight | 250 kg |
| Shipping Weight | 350 kg |
