Vacuum chamber and heating
| - Stainless steel vacuum chamber with water-cooling Ø500×700 H (mm)
- Hinged-type front door with observation window
- Induction Heating
- Maximum Temperature: 3000℃ ( 30 MINUTES)
- Continuous Temperature: 2900℃
- Heating Zone (Graphite crucible): φ200×300mm
- High vacuum (≤ 10-5 Torr) via a turbo pump ( 10-2 torr by mechanical pump )
- Temperature Uniformity: ≤±10℃ Base on protective gas flow ≤10L/min, after 30 mins constant temperature
|
Power and Control | - 480AC +/- 10% ,three-phase, 50/60Hz
- IGBT power supply: 70KW Max.
|
Induction heating
| - Infrared Pyrometer 1000℃~3200℃ as a temperature sensor
- Induction coil: Ø340 mm
- Graphite crucible:Ø200 × 300 mm
- Flexible carbon felt as thermal insulation
|
Gas purification | - One foreline gas purification system is included.
|
Water Chiller
| - One recirculating water chiller is included
- Temperature range: 5 - 30°C
- Water Flow Rate: 200 L/min
- Power: 16.5 kW
- Nominal cooling capacity: 38 kW
- Refrigerant: R-410a
|
Vacuum Pump | - One rotary vane vacuum pump is included
- A digital vacuum gauge is included for the mechanical pump
- Turbupump with digital vacuum gauge is optional
|
Dimensions | - Graphitization furnace: 800×1300×1500 mm (L×W×H)
- Induction power supply: 700×400×835 mm and 560×490×730 mm (L×W×H)
- Water chiller: 1900×1080×1400 (L×W×H)
|
Weight | - Graphitization furnace: 780 kg
- Induction power supply: 145 kg
- Water chiller: 460 kg
|
Compliance | - CE certified
- NRTL or CSA certification is available upon request at the extra cost
|
Warranty | - One-year limited warranty with lifetime support
- Consumable parts such as processing tube, refractory liners, o-rings and heating coil are not covered by the warranty
|