Furnace Construction
| - High-purity fibrous alumina insulation for maximum energy saving - 30% less power consumption than other brands
- Drop-down door for easy sample loading.
|
Hybrid Furnace
| - Muffle Furnace:
- A thermal block is included for using this furnace as a muffle furnace.
- Tube Furnace:
- The 2" port on top of the furnace allows the furnace to work as a tube furnace for high vacuum applications.
- Compatible with tubes with lengths ranging from 215 to 265mm.
|
Dimension
| - 4"x4"x5" or 100 mm x 105 mm x 130 mm
- Capacity: 65 cubic-inch or 1 liter
- Overall dimension: 230mm x 200mm x 360mm (LxDxH)
- 230 x 440 x 360mm with the door opening.
|
Sintered Mullite Plate | - One sintered Mullite plate is included for placing the sample in the chamber.
|
| Power | - 110V version: 950 W (Power Plug is included)
- 220V version: 1.2 KW (Power Plug is not included)
|
Operating Temperature | - 1000°C max for an hour
- 900 °C for continuous operation
|
Max. Heating Rate | |
| Temperature Controller | - PID automatic control and auto-tune function
- 30 programmable segments for precise control
- Built-in protection for the over-heating and broken thermocouple
- Large digital control panel (48 x 96 mm) for easy operation
- Temperature accuracy: +/- 1 °C
- Thermocouple: K type
|
Optional
 | - Two 8 mm diameter barbed fittings can be installed as gas inlet and outlet on the back of the furnace panel, which is available at extra cost ($99 for both connectors), please see the picture on the left.
- Note: Self-installation is required. The open barb holes and threaded holes will be ready.
|
Warranty | - One-year limited warranty with lifetime support
- ATTENTION: Any damages caused by the use of corrosive and acidic gases are not under the coverage of MTI One Year Limited Warranty.
|
Compliance
| - CE Certified
- NRTL (UL61010) or CSA certification is available at extra cost.
|
Application Notes
| - With the small footprint, low weight, and low power requirement can be easily accommodated in a glove box and threat samples under protective gases. Please click pic.1~3 to see more details.
- For high vacuum application ( <1e-5 torr), please choose a quartz tube with CF flange as in picture 3
-
 Pic.1  Pic.2  Pic. 3
|
Warnings | - Toxic or explosive gases are not recommended for use with this furnace without necessary safety controls and supervision. Please put the furnace into the fume hood for better safety (Click Pic.1)
- Small cracks may appear on the surface of the refractory ceramics over extended use. This is a normal occurrence and the cracks may be repaired with alumina coating.
|
| Operation Video | 
 |
