|
Metallic Wire Preparation for WAAM
Wire Drawing Machine From 1.0 mm to 0. 2mm for WAAM - YLJ-WD-6
YLJ-WD-6 is a wire drawing machine with a series of diamond dies to make thin wire from 1 mm to 0.2 mm. This device is necessary for wire preparation of metallic wire for AM (Click here to see details) or called WAAM ( Wire arc additive manufacture )
SPECIFICATIONS:
Power | - 208- 240V, single phase, 50/60Hz
- 2.5 KW AC motor
- 380VAC, three-phase is available upon request
| Wire Drawing Die
| - Two sets of 12 holes diamond die plates are included for precision wire drawing
- The first set of hole diameters: 1.0, 0.9, 0.8, 0.7, 0.65, 0.60, 0.55, 0.50, 0.45, 0.425, 0.40, 0.375
- The second set of hole diameters: 0.35, 0.325, 0.30, 0.275, 0.25, 0.225, 0.20
- For the most metallic with RC < 50, only can draw to 0.2 mm
- A coolant praying head is included
- The automatic winding device is built-in
- Note: Diamond die is consumable
- Customize die is available
| Drawing Speed | - 0 - 50 mm/minute adjustable
| Overall Dimensions | - 1800mm L x 700mm W x 1230mm H
| Net Weight | | Compliance
| - CE Certified
- NRTL certification is available upon request at an extra cost
| Warranty | - One year limited with lifetime support
- Rusting and damage due to improper storage condition or maintenance are not covered by warranty
| Reference Video | | Application Note | - Never draw materials with hardness > 50HRC
- For some material, you may need to anneal it by furnace after each rolling to avoid work hardening
|
|