Model
| MSK-AFA-I | MSK-AFA-III-HB | MSK-AFA-III-110/220 | MSK-AFA-III-HB
-UV-110/220 | MSK-AFA-IIIT-HBT |
| Optional Heating Cover Voltage and Power | No Heating
| Bottom Heating 110/ 220VAC 850W 120ºC | Top Heating
1.2KW, 100ºC
| Top UV (WL: 365nm)
Bottom Heating, 1kW, 120ºC
| Top and Bottom Heating
110/220V, 2.3 kW, 120ºC
|
| Working Power | - Power adaptor: Input 100-240VAC, Output 24VDC
|
| Traverse Speed | - 10 - 100 mm/sec variable
- Accuracy: ± 5-10 mm/sec
|
Coating Area
| - Standard Package: 320mm(L) x 100mm(W) due to the width and occupied area of the 100mm applicator
- Suggested Maximum: 350mm(L) x 180mm(W) Reduced width to avoid slurry spilling off the vacuum bed
- Length 10 - 350 mm adjustable by using Adjustable Position Switch
|
Vacuum Chuck
| - Vacuum chuck made of Aluminum alloy with < 1.0 mm hole
- Vacuum Chuck Dimensions: 365mm(L) x 200mm(W) （ 14“L x 8"W )
- Note: You may order a glass plate to coat slurry on a porous substrate at the link below
 
|
| Coating Area | - Maximum: 350mm(L) x 180mm(W) Reduced width to avoid slurry spilling off the vacuum bed
- Length 10 - 350 mm adjustable by using Adjustable Position Switch
|
Film Applicator
|    Note: Thinnest film that can be achieved is > 10 microns
|
Vacuum Pump
 (optional) | |
Pump connector
| - The vacuum control power switch is located on the front panel, and the power plug ( female ) is built into the back of the machine to connect an optional vacuum pump
- The pump connector is a compression-type 8mm O.D tube fitting which is located on the back panel (see pic below). An 8mm Dia. x 4ft polyurethane tube is included
 
|
Heating Cover(Optional) | - Pre-installed on the top cover
- Built-in digital temperature controller with an accuracy of +/-1°C
- Suspension support helps open the cover easily and safely
- Max. Heating Temp.: 100°C
- Note: In order for faster and uniform heating, please preheated the vacuum chunk to 60- 70°C before coating, and keep heating during coating, then close the cover and increase the temperature to ~100°C after coating
|
| Product Dimensions | For MSK-AFA-I (without Dryer Cover)
550 (L) x 330 (W) x 150 (H), mm | For MSK-AFA-III (with Top heater)
550mm(L) x 330mm(W) x 320mm(H) |
Compliance
| - CE Certificate
- NRTL or CSA certification is available upon request
|
| Warranty | One-Year limited warranty with lifetime support |
Operation Video
|     |
| Application Notes | |
| Net Weight | 45 kg (96 lbs) | 60 kg (135 lbs) |
| Shipping Weight & Dimension | 160 lbs, 40" x 30" x 30" |
