Features
|
• Controllable feeding and dispensing speed and time.
• Optional water cooling system and temperature control system.
• PLC touch screen operation system.
• Can dispense the slurry continuously or recirculating.
|
| Working Voltage | 380V AC, 50 Hz, three phase.
208VC three phase is available upon request |
| Input Power | 5 kW. |
| Feeding Speed | 0 - 10 Liter/h adjustable |
| Dispersing Speed | 0 - 50 m/s. adjustable |
| Feed In/Out Temperature | <40 °C. |
Slurry Feeder
| • 4 L Capacity
• Pneumatic airtight slurry reservoir.
• 5.2 to 3699 mL/min, adjustable
• Stirring Speed: 27RPM Max
• 0.5~0.8MPa compress gas is required , but included |
| Dispensing Chamber | • Capacity: 80 mL (other sizes of chambers are also available).
• Chamber material: SUS316,PTFE,EPDM. |
| Material Requirement | 0 ~ 50000 mpa.s (or lower the mixing speed for more viscous slurry). |
| Optional |
The water chiller (> 200L/minute ) is required at extra cost. You may order two water chiller by click picture below
|
| Optional | Compatible with water chiller and temperature control system (request at extra cost):
|
| Working Environment | Stationed on a hard and leveled surface, no electromagnetic interference. |
| Net Weight | • Feeder: 350 kg.
• Mixer: 70 kg. |
Dimensions
|
• Slurry Feeder: 650 × 800 × 1000 mm (L × W × H).
• Dispenser: 500 × 600 × 700 mm (L × W × H). |
Compliance |
• CE Certified
• MET, UL or CSA certification is available upon request at
extra cost
|
Warranty |
• One-year limited warranty with lifetime technical support
• Rusting and damage due to improper storage conditions or lack of
maintenance is not covered by warranty |
Operation Instructions |
 
|
Application Note |
For the best slurry coating, suggest use the flow chart as the blow:
 Multi-Axis Mixing ------->
 High-Speed Dispensing ------->
 Precision Feeding ------->
 Roll to Roll Coating
|
